SWM-8TPS-2UCB-S28 SWM-24TPS-2UCB-S28 Main features : Standards: IEEE: 802.3, 802.3u, 802.3x, 802.3ad, 802.1d, 802.1w, 802.1s, 802.1q, 802.1p, POE, Power Over Ethernet: 802.3af, and 802.3at Interfaces: SWM-8TPS-2UCB-S28 8 x10/100Base-TX POE PSE 8 ports 802.3af 15,4W or 4 ports 802.3at 30W SWM-24TPS-2UCB-S28 24 x10/100Base-TX POE PSE 24ports 802.3af 15,4W or 12 ports 802.3at 30W And for both devices : 2 universal combo ports 10/100/1000BaseT and 100FX/1000FX per SFP 1 RS-232 (RJ-45) consol port 1 Admin/SNMP Ethernet port Network Specifications: 802.1x Remote function testing & troubleshooting Enable the limitation of MAC for access users MAC address/port based binding Port-based/VLAN traffic rate limit Egress/Ingress port traffic rate 64K granularity Support 4K 802.1Q C-VLAN, S-VLAN Q-in-Q, P-VLAN and flow-based priority tag Support VLAN translation DHCP snooping & option 82 512 multicast groups Rapid Spanning Tree Protocol Multiple Spanning Tree Protocol Ring net protection (50 msec) IGMP Snooping for multicast filtering, IGMP Fast Leave The CXR SWM-xTPS-2UCB Carrier Ethernet switches are sourcing POE (Power over Ethernet). They are used to concentrate and power feed 8,16 or 24 ports according to IEEE802.3af with 15,4W or half number of port according to IEEE802.3aft with 30W. They are servicing and power feeding IP cameras, Wifi/radio access points and all new generation equipments. SWM-8/16/24TPS-2UCB are Layer 2 manageable switches with 8, 16 or 24 10/100BaseT POE ports and 2 universal combo ports with one 10/100/1000BaseT and one SFP 100FX/1000FX delivered w/o module. Administration, monitoring of traffic and power feeding ports is particularly developed. This include a RMON probe. ‘'InBand'' or ''Out-band'' management is done in http, CLI or SNMP over LAN/WAN, the SNMP/Ethernet or an RS232/consol port. The SWM-xTPS-2UCB is rich by his Networking features. It's supporting P-VLAN with L2 port isolation, VLAN 802.1q tagging with C-VLAN and S-VLAN or Q-in-Q, the VLAN multicast, VLAN mapping 1:1 and N:1. The SWM-xTPS-2UCB owns solid security functions with 802.1x Radius client, fixed MAC address per port of static list of address, This manage ingress/egress rate limiting per port with 64K granularity and a QoS with 4 priority queues. This switch support Mesh networks with RSTP/MSTP Spanning Tree and ESR ring with less 50ms recovering, Trunking supports up to 8 FE ports or the 2 GE. The SWM-xTPS-2UCB integrate powerful multicast functions with IGMP V1/2/3 snooping of 256 groups, Simultaneous distribution of unicast VoD and multicast TVoIP traffic can be processed. His robustness and power lines or Ethernet port protections give to the SWM-xTPS-2UCB a good label of quality to serve POE devices in transportation, utilities, defense and Telco domain. Management: Console port, mangement port and over LAN/WAN ports Web-based GUI, In-Band, Out-of-Band SNMP V1/v2/v3 ,RMON Telnet/SSH, CLI Port configuration, status, statistics, security Loss of link management on fiber. Power: Anti-lightning protection power and line interface Version AC 100 ~ 240V AC Version -48VDC Applications The SWM-xTPS-2UCB series is used to concentrate and power-feed IP cameras, IP phones, Wifi hot-spots or new generation smart tablets. Each port can be set or limited to support up to 15,4W or 30W as IEEE802.3af or.3at and to protect against over voltage or temperature excess.

Page 2 Version 1.0 - April 2014 Switch POE Carrier Ethernet

Page 3 Version 1.0 - April 2014 Page 3 Version 1.0 - April 2014 Switch POE Carrier Ethernet Specifications Equipements

Page 4 Version 1.0 - April 2014 Page 4 Version 1.0 - April 2014 Switch POE Carrier Ethernet CXR Anderson Jacobson Rue de l' Ornette 28410 Abondant - France T +33 (0) 237 62 87 90 F +33 (0) 237 62 88 01 email: [email protected] CXR Anderson Jacobson reserves its rights to modify the specifications without notice. This document is not a contractual document.