Humidity Conditioning Cabinet
4Pages

C&w Humidity Conditioning Cabinet Humidity Conditioning Cabinets Designed to meet environmental testing requirements.

C&W cabinets are designed to meet the environmental testing requirements of the paint, plastic, packaging, paper, board, electronic, automotive, aerospace, military, textile and telecommunications industries. The units function as variable humidity, temperature humidity, environmental, climatic or conditioning cabinets. Temperature and humidity testing and product conditioning is of vital importance to the research chemist, development engineer and quality assurance manager to ensure the product is researched, developed and manufactured to a standard guaranteed to survive the environment...

C&W CCT cabinets conform to all leading corporate, national and international standards including: British/ISO/EN Standards: German Standards: American Standards: Japanese Standards: Corporate Standards: -Toyota TSH 1555G, Ford EU B 153-2, VDA 624-415, VW-1210-C, Renault, SWAAT + Mastmaasis Flonda 5100Z,, GM 9540 P, Nissan M0007, CCT I, II & IV, Unichem 692 & 741. 'Soft Touch' waterproof membrane keypad control panel Humidity generator/condenser unit supplied on castors linked to the cabinet by a 0 100 mm flexible flow and return ducting. Design Features v Maximum internal volume use with...

Style Floor Mounted Condenser Unit Floor Mounted Unit to stand next to test cabinet connected by two flexible hoses. Condenser dimensions: 700 mm x 1150 mm x 540 mm (LxWxH) Power Supply 230 V 50/60Hz single phase, other voltages on request Water Type De-ionised or mains water below 50 mg/litre TDS Water Pressure 2 to 4 bar (30 to 60 psi) 36 mm outside diameter plastic pipe to liquid waste Reservoir With Lid Supplied on castors with internal solution filter 500 mm x 620 mm x 540 mm (LxWxH) Optional Extras Sample racks, sample rods and spiked racks, designed to Entry ports for sensors, air or...