The SW600 is designed for use in telecommunication and power distribution applications where an uninterrupted load is switched. These contactors are primarily for use with Direct Current loads but can also be used with Alternating Currents. • Uninterrupted current - no or infrequent load switching requirements (maintains lower contact resistance). The SW600 features double breaking main contacts with silver alloy tips which are weld resistant, hard wearing and have excellent conductivity. Silver plating on the main contacts is standard for the SW600, however, optionally it can be excluded from the specification. This compact contactor can be busbar mounted vertically or horizontally, but if mounted vertically, the coil should be at the bottom. If the coil is required at the top, we can adjust the contactor to compensate for this. Optional extras include auxiliary switches, brackets, coil finishes and magnetic latching which allows the contactor to remain closed while consuming no coil power. Please note, although still available the SW600 has been superseded by the SW560. <j? ^ Current (Amperes) Uninterrupted Current Performance data provided should be used as a guide only. Some de-rating or variation from figures may be necessary according to application. Thermal current ratings stated are dependant upon the size of conductor being used For further technical advice email: [email protected] Albright reserve the right to change data without prior notice Alaright Int2rnational Ltd, Evingar Trading Estate, Ardglen Road, Whitchurch, Hampshire, RG28 7BB, UK Tel: +44 (0)12b6 8 9 30(50, Fax: +44 (0)12(5(5 893562, Dedicated Seles Tel: +44 (0)1256 89e030, Fax: +44 (0)12(56 890043 E-mail: [email protected] or [email protected] Web Site: www.albrightinternational.com Copyright © 2013 Albright International LTD