Catalogs >
Cummins Inc. >
PowerCommand 3300 Control Panel Brochure

PowerCommand 3300 Control Panel Brochure
6Pages

Add to favorites

Catalog excerpts

PowerCommand 3300 Control Panel. ®

Open the catalog to page 1

PowerCommand® Control Panel. The PowerCommand Control Panel (PCC 3300) is a microprocessor-based Drilling Power Module (DPM) monitoring, metering and control system. The PCC 3300 offers integrated electronic governor and integrated AVR® controllers. The advantages are fewer components, faster response time, high reliability, better serviceability and minimal wiring. The programmable starting eliminates human intervention and remote starting. The PCC 3300 can be used in both Full-Authority Engines (FAE) and hydromechanical engines. The PowerCommand control panel has been designed and tested...

Open the catalog to page 2

PowerCommand 3300 Control Panel Brochure - 3

Base Control Functions – Human Machine Interface (HMI) Capability. Operator adjustments – The HMI includes provisions for many setup and adjustment functions. Data Logs – Include engine run time, controller on time, number of start attempts, total kilowatt hours and load profile. Data are presented on the operation panel based on total operating hours on the generator. Fault History – Provides a record of the most recent fault conditions, with control data and time stamp. Up to 32 events are stored in the control nonvolatile memory. Alternator Data – oltage (single- or three-phase...

Open the catalog to page 3

PowerCommand 3300 Control Panel Brochure - 4

Paralleling Functions. First Start Sensor™ System – The First Start Sensor system is a communication system among the DPMs that allows them to work together to determine which DPM in a system should be the first to close to the bus. Alternator Control. The control includes an integrated three-phase line-to-line sensing voltage regulation system that is compatible with PMG excitation systems. The voltage regulation system is a three-phase full-wave rectified and has FET output for good motor starting capability. Major system features include: Digital Output Voltage Regulation – Capable of...

Open the catalog to page 4

PowerCommand 3300 Control Panel Brochure - 5

Communications Connections. PC Tool Interface – An RS-485 communication port allows the control to communicate with a personal computer running InPower software. InPower (beyond 10.0 version) is a PC-based software service tool designed to communicate directly to PowerCommand DPM to facilitate service and monitoring of those products. ModBus RS-485 Port – Allows the control to communicate with external devices such as Programmable Logic Controllers (PLCs) using ModBus protocol. (Note: An RS-232- or USB-to RS-485 converter is required for communication between PC and control.) PowerCommand...

Open the catalog to page 5

PowerCommand 3300 Control Panel Brochure - 6

Cummins Inc. Box 3005 Columbus, IN 47202-3005 U.S.A. Phone: 1-800-DIESELS™ (1-800-343-7357) Fax: 1-800-232-6393 Internet: cumminsengines.com Twitter.com/CumminsEngines YouTube.com/CumminsEngines Bulletin 4087344 Printed in U.S.A. Rev. 6/14 ©2014 Cummins Inc.

Open the catalog to page 6