Onan RV & commercial mobile generator accessory catalog Experience the genuine reliability of Cummins

Control Panels, Gauges and Displays 15 Remote Panel Harnesses 18 Energy Command Auto Generator Start System 21 AC Conduits & Junction Box Kits 22

Onan Generators In some sections, the models are grouped together for the product family. HGJAx = HGJAA, HGJAB, HGJAD, HGJAE HGJAA HGJAD For travel trailers, fifth wheels and class A or C motorhomes Variable speed - inverter based EFI - single fuel line 4.0 kW continuous power Runs one 15,000 BTU A/C HGJAB HGJAE For travel trailers, fifth wheels and class A or C motorhomes 5.5 and 7 kW continuous power Runs two 13,500 BTU A/C (5.5 kW) Runs two 15,000 BTU A/C (7 kW) ONAN QG 7000iDF Variable speed engine with PMA alternator Low noise and vibration Electronic fuel injection J1939 interface Over...

CARB 2024 Certified (LP only) For Class B RV’s, truck campers For travel trailers and class C motorhomes Variable speed - inverter based Single fuel line - Fuel inj. 2.8/2.5 kW continuous power Runs one 13,500 BTU A/C HGJAB HGJAE CARB 2024 Certified For travel trailers, fifth wheels and class A and C motorhomes 5.5 kW continuous power Runs two 13,500 BTU A/C (5.5 kW) Runs two 15,000 BTU A/C (7 kW)

HDKAH HDKAV HDKAK KDKAU For Class C sprinter chasis RV Variable speed PMA generator Variable speed PMA generator Inverter Control Inverter Control ONAN QD 10,000 HDKCA HDKCC HDKCB HDKAW

Installation Templates Dealers should contact their local Cummins Sales and Service representative to order templates. Compartment Mount Template Description A paper guide for making the mounting and cooling holes required to properly install generator Underfloor Mount Template Description A paper guide for making the mounting holes required to properly install the generator Drawing / Compartment Mount Template Underfloor Mount Template

Description This tray is designed to make installation easy for HGLBA products. Compatibility HGLBA A030X652 BOXED KIT UNDERFLOOR MOUNTING KIT-SOFT (QTY 1) UNDERFLOOR KIT-SOFT Instruction Sheet G208 Description This tray is designed to make installation easy for HGLAA products. Compatibility KYA043F935026-00095 TRAY KY - MARQUIS W/ 5 HOLES Description This tray is designed to adapt the KY series genset to the bolt pattern of the sides of the HGJAx generator. Description This tray is designed to make installation easy for HGLAA products. Description This tray is designed to divert hot discharge...

MODIFIED BP-83 STRINGER - GOLD Description Side stringer for mounting to a set of slides for generator installation. These are sold individually, but two are needed to install the generator with slides. Description Side stringer for mounting to a set of slides for generator installation. These are sold individually, but two are needed to install the generator with slides. TRAY SET RHINO W/ SMALL ISO Description This part is part of a 3-piece set, tray set Rhino w/small ISO and will be packed out for the prep line. The tray support (026-00206) is placed over the Rhino side plate (026-00533) and...

Description Door for commercial box enclosure. Compatibility HGJAx Description Underfloor kit that allows generator to slide out 22 inches for easy access. Kit Includes Upper Tray (ref. 026-00117), Lower Tray (ref. 026-00138), Slide Rail Set (ref. 699-01082) and hardware. Powder-coated white. Compatibility HGJAx UNDERFLOOR MOUNTING KIT W/DOOR HINGE, STAINLESS STEEL - WHITE Description Hinge for the commercial door for Compatibility HGJAx COMPARTMENT KIT W/ FLUSH DOOR Description Underfloor kit that allows generator to slide out 22 inches for easy access. Kit Includes Upper Tray (ref. 026-00117),...

026-00167 STANDARD COMPARTMENT DOOR Description Exterior compartment door that can be used with our compartment or in a separate application. Powder-coated white. Typically used in commercial applications. Description Riser for installation that requires additional height of 4 inches. Not intended to be used for installations used to pull air through the door. Available in powder-coated white or black. Description Exterior compartment door that can be used with our compartment or in a separate application. Powder-coated white. Typically used in commercial applications. Installation Intended for...

026-00531 AIR DISCHARGE DUCT - REAR 026-00377 6-INCH WHITE DISCHARGE WRAP Benefits Wraps around generator base to discharge air through the floor. Installation Used when all or part of the generator air flow (intake and exhaust) is blocked or does not meet 12-inch ground clearance requirement. Six inches of unobstructed air flow is required for proper generator operation when installation will bring cooling air through the front of a door. Description Ducts cooling air to the rear of the Kit Includes Air discharge duct and mounting Installation Designed to discharge air towards Works best on...

AIR DISCHARGE VANE - SIDE Description Direct cooling air outlet toward the right side of the generator, away from the inlet. HEAVY DUTY SLIDE RAIL SET Description Each slide assembly measures 22 inches x 7 inches with a 23-inch travel (extension). Maximum load capacity is 816 lbs. at full extension. Can be used with narrow side mount frame (ref. 026-00364, sold separately) and side stringers (ref. 026-00430, sold separately). Compatibility HDKAx, HDKCx SIDE SLIDE TRAY Description Side slide to allow side installations to slide out for easy access. Installation Can be used with or without slide...

026-00186 TRAY QD GEN BASE + SLIDE 10-12 Description Tray allows generator to be extended (slide out) 28-1/2 inches from mounting tray for easy access. Designed for easy generator removal. TRAY CMM LOWER AIR DISCHARGE BLOCK (NOT SOLD SEPARATELY) Description Lower discharge air tray used in Installation Commonly used on diesel pusher-style coaches with front-mount generator. Compatibility HDKCx TRAY CMM W/SIDE AIR DISCHARGE K/O Description Air Discharge tray used with ROLLER 1-1/2" DIA SEALED (NOT SOLD SEPARATELY) Description Diesel slide rollers used in kit 026-00316. TRAY CMM SIDE AIR DISCHARGE...