Specification sheet Diesel generator set 10 kW - 15 kW EPA emissions stationary Standby Description ® Cummins generator sets are fully integrated power generation systems providing optimum performance, reliability and versatility for stationary Standby applications. Features Kubota heavy-duty engine - Rugged 4-cycle, liquid-cooled, industrial diesel engine delivers reliable power, low emissions and fast response to load changes. Alternator - Several alternator sizes offer selectable motor starting capability with low reactance 2/3 pitch windings, low waveform distortion with non-linear loads and fault clearing short-circuit capability. ® Control system - The PowerCommand 1.1 electronic control is standard equipment and provides total generator set system integration including automatic remote starting/stopping, precise frequency and voltage regulation, alarm and status message display, output metering, auto-shutdown at fault detection and NFPA 110 Level 1 compliance. Standby rating 60 Hz Model Cooling system - Standard cooling package provides reliable running at up to 50 °C (122 °F) ambient temperature. Enclosures - The aesthetically appealing enclosure incorporates special designs that deliver one of the quietest generators of its kind. Aluminum material plus durable powder coat paint provides the best anti-corrosion performance. The generator set enclosure has been evaluated to withstand 180 MPH wind loads in accordance with ASCE7-10. The intelligent design has removable panels and service doors to provide easy access for service and maintenance. Fuel tanks - Two dual wall sub-base fuel tank series are offered as optional features, providing economical and flexible solutions to meet extensive code requirements on diesel fuel tanks. NFPA - The generator set accepts full rated load in a single step in accordance with NFPA 110 for Level 1 systems. Warranty and service - Backed by a comprehensive warranty and worldwide distributor network.

Generator set specifications Governor regulation class Voltage regulation, no load to full load Random voltage variation Frequency regulation Random frequency variation Radio frequency emissions compliance FCC code Title 47 Part 15 Class B Engine specifications Bore Cast iron, in-line, 3 cylinder Battery capacity 550 amps at ambient temperature of 0 °F to 32 °F (-18 °C to 0 °C) Battery charging alternator Starting voltage 12 volt, negative ground Fuel system Indirect injection: low or ultra-low sulfur, number 2 diesel fuel Fuel filter Single element, spin-on fuel filter with water separator Lube...

Generator set options (continued) Warranty  Base warranty – 2 year, 1000 hour, Standby  Standby, 3 year, 1500 hour, parts  Standby, 5 year, 2500 hour, parts  Standby, 3 year, 1500 hour, parts and labor  Standby, 5 year, 2500 hour, parts and labor  Standby, 3 year, 1500 hour, parts, labor and travel  Standby, 5 year, 2500 hour, parts, labor and travel Extreme cold weather kit Battery rack, larger battery Battery heater kit HMI211RS in-home display, including pre-configured 12” harness HMI211 remote display, including pre-configured 12” harness HMI220 remote display Auxiliary output relays...

Other data  Generator set model data  Start attempts, starts, running hours  Fault history ®  RS485 Modbus interface  Data logging and fault simulation (requires InPower service tool) Digital governing (optional)  Integrated digital electronic isochronous governor  Temperature dynamic governing Digital voltage regulation  Integrated digital electronic voltage regulator  2-phase Line-to-Line sensing  Configurable torque matching Control functions  Time delay start and cooldown  Cycle cranking  PCCNet interface  (2) Configurable inputs  (2) Configurable outputs  Remote emergency...

Sound attenuated enclosure Level 1 C10 D6 Sound attenuated enclosure Level 2 C10 D6 * Weights represent a set with standard features. See outline drawings for weights of other configurations. Codes and standards Codes or standards compliance may not be available with all model configurations – consult factory for availability. This generator set is designed in facilities certified to ISO 9001 and manufactured in facilities certified to ISO 9001 or ISO 9002. The generator set is available Listed to UL 2200, Stationary Engine Generator Assemblies. The Prototype Test Support (PTS) program verifies...