*mydirectindustry

Mainstream ETC02 module

Product catalog summary

Introduction
The Mainstream End-Tidal Carbon Dioxide Module CM2200 is designed using infrared absorption spectroscopy to measure CO2 concentration at the end of an exhaled breath. It offers direct measurement in the patient's intubation, ensuring faster response times and eliminating errors from gas line leaks. The module is resistant to airway secretions, reducing maintenance costs, and is easy to integrate with monitors or anesthesia machines using an 8-pin socket and compatible software.

Features

Fast response and long-lasting life with high accuracy due to the NDIR sensor.
High accuracy temperature and pressure compensation technology.
EMI system to prevent electromagnetic interference.
Compatibility with Respironics CapnoStat5 or CPT Protocols, with optional TTL and R232 interfaces.
Auto calibration to eliminate drift from temperature, pressure, and component inconsistencies.
Strong clinical waveform recognition ability.
Low power consumption and compact size.

Principle of Operation
The module operates on the non-dispersive infrared (NDIR) principle.

Specifications

CO2 Measuring Range: 0 to 20% vol
Resolution: 0.1 mmHg @ 0 to 49 mmHg, 0.2 mmHg @ 50 to 150 mmHg
Accuracy: ±2 mmHg @ <5.0% CO2 (at BTPS), with varying accuracy at higher ranges
Warm-up Time: 10 seconds
Response Time: Detector - 25ms, System - 200ms
Respiration Rate Range: 2 ~150 BPM with ±1 breath accuracy
Calibration: No routine user calibration required, user calibration possible
Data Interface: TTL or R232
Displayed Parameters: CO2 gas concentration, End-tidal CO2, Inspired CO2, Respiratory Rate
Power Supply: 5.0 VDC ±5%
Power Consumption: <400mW
Size: 50mm×23mm×36mm
Operating Temperature: 5ºC-50ºC
Storage Temperature: -40ºC-70ºC

Applications
The module is suitable for use in anesthetic machines, respirators, and ETCO2 monitors.

Catalog excerpts

Mainstream End-Tidal Carbon Dioxide Module CM2200 (Mainstream ETCO2 module) Wuhan Cubic Optoelectronics Wuhan Cubic Optoelectronics Co.，Ltd Co.，Ltd Add:Fenghuang No.3 Road, Fenghuang Industrial：Fenghuang No.3 Road, Fenghuang ADD Park,Eastlake Hi-tech Industrial Zone,Wuhan 430205, China DevelopmentPark,Eastlake Hi-tech Development Zone, Tel: Wuhan, 430205, China 86-27-81628831 Fax: TEL：+86-27-87405251 86-27-87405251 FAX：+86-27-87401159 Email: [email protected] [email protected] www. GasSensor

Open the catalog to page 1

It is designed by the principle of infrared absorption spectroscopy for the determination of the concentration of C02 at the end of an exhaled breath. The measurement directly in the patient's intubation, with faster response, and will not be error readings because of gas line leaks. The patient's airway secretions are not pollution to the module, no need to replace the air pump and other pneumatic devices, so maintenance costs is very low. It is easy to intergate, just on the monitors or anesthesia machine equipped with an 8-pin socket and the preparation of the corresponding display / control...

Open the catalog to page 2

■Fast response, long-lasting life, high accuracy due to NDIR Sensor. ■Be widely used for the technology of the compensation of high accuracy temperature and pressure. ■EMI system can be against the interference of electromagnetic ■Compatible with Respironics CapnoStat5 or CPT Protocols. TTL and R232 can be optional. ■Auto calibration function to wipe off the drift from temperature, pressure and inconsistent component. ■Clinical waveform recognition ability is stronger. ■Low power consumption and small size J

Open the catalog to page 3

WHCUBIC Mainstream End-tidal C02 Sensor-CM2200 Principle of Operation

Open the catalog to page 4

All Cubic Sensor and Instrument Co.,Ltd catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list