*mydirectindustry

LANDFILL APPLICATIONS

Product catalog summary

Overview: The document provides detailed specifications and applications for the GAS3200L Biogas Analyser, designed for use in biogas plants, anaerobic digestion, wastewater treatment, sludge digestion, biomethane production, and landfill sites. It measures gases such as CO2, CH4, O2, and H2S, with optional N2 calculation.

Specifications: The analyser uses proprietary dual beam NDIR detectors for CO2 and CH4, and industrial electrochemical cells for O2 and H2S. Measurement ranges include CO2 (0-50%), CH4 (0-100%), O2 (0-25%), and H2S (0-9999 ppm). The device features a resolution of 0.01% for CO2, CH4, and O2, and 1 ppm for H2S, with accuracy levels of ≤ ±2% FS for CO2 and CH4, and ≤ ±3% FS for O2 and H2S. It includes an auto-zeroing function, operates with a flow rate of 0.7 to 1.2 L/min, and requires no dust, water vapor, or tar in gas conditions.

Operating Conditions: The analyser functions within a temperature range of 0-50°C, pressure range of 86 to 108 kPa, and relative humidity of 0-95% non-condensing. It has a response time of ≤ 15 seconds for NDIR and O2, and ≤ 60 seconds for H2S, with a warm-up time of 15 minutes.

Communication and Power: The device includes an RS232 interface for real-time data download, powered by an external 220 VAC-50Hz supply or an internal battery with over 4 hours of autonomy. It can log up to 1500 sets of 6 data points and features an LCD display with backlight.

Accessories and Options: Standard accessories include a nylon carrying bag, biogas probe, ambient temperature probe, gas tubing, power cable, RS232 cable, operation manual, and test & calibration report. Optional accessories include a gas conditioning device.

Wall-Mounted System: The document also describes a wall-mounted landfill analysis system for continuous biogas monitoring, featuring a stainless steel cabinet with IP65 rating, suitable for outdoor installation. It includes a 4-gas analyser for O2, CO2, CH4, and H2S, with specific ranges, resolutions, and accuracies.

Environmental and Pneumatic Specifications: The system operates in temperatures from -15°C to +45°C, humidity from 0-95% RH non-condensing, and pressure from 800-1200 hPa. It includes stainless steel connectors, a manual valve for calibration, a flow meter, and a built-in heater to prevent condensation.

Catalog excerpts

SAFETY – PROCESS INDUSTRY LABORATORY & RESEARCH

Open the catalog to page 1

LANDFILL APPLICATIONS BIOGAS PLANT

Open the catalog to page 2

Portable GAS3200LBiogas Analyser O2% + CO2% + CH4% + H2 S ppm + optional N2 value calculation Applications Biogas plants Anaerobic digestion Waste water treatment plants Sludge digestion Biomethane production plants Landfill

Open the catalog to page 3

ACCESSORIES & OPTIONS Standard accessories Nylon carrying bag for analyzer and accessories Biogas probe RS232 cable Ambient temperature probe Gas in/out tubing Power cable 220 VAC RS232 cable Operation manual Test & calibration report Biogas sampling probe 

Open the catalog to page 5

Applications It is based on the single source two beams non-dispersion infrared (NDIR) method for CH4, CO2, fuel cell method (ECD) for H2S and O2. This analyzer is designed with 19 inches 3U smaller physical dimensions and the simple digital pulsable infrared source and two beam systems. □Biogas plants □Anaerobic digestion □Waste water treatment plants □Sludge digestion □Biomethane production plants □ Landfill sites General Features * Other range available on request •Proprietary infrared dual beam NDIR detectors for CH4 and CO2 •Proprietary thermal conductivity detector for H2 •Industrial...

Open the catalog to page 6

Professional online gas analysis systems for continuous monitoring of Biogas Landfill gas analysis systems are the best tooling to help you: ato check whether the gas is still being produced to decide when the land can be reclaimed. ato check the quality of the gas being produced prior to use in some industrial process. aTo continuously monitor the efficiency of H2S scrubber installations

Open the catalog to page 7

4-gas analyzer for Biogas process monitoring Gas name Symbol Technology Range1 Resolution Accuracy T90 Wall-mount IP65 stainless steel cabinet for outdoor installation. Mechanical specifications •Dimensions: H700 x W450 x D220 mm •Material: stainless steel, plate thick 2 mm •4 brackets for wall mounting •Hinged front door with visualization •window (255 x 100 mm), with handle •Door clamping with 6 bolts M8 •Internal compartment for Biogas analyzer Environmental conditions • Operating temperature range:-15°C to +45°C • Operating humidity range : 0-95% RH non condensing • Operating pressure...

Open the catalog to page 8

LANDFILL APPLICATIONS

LANDFILL APPLICATIONS

Catalog excerpts

All Cubic Sensor and Instrument Co.,Ltd catalogs and technical brochures

Archived catalogs