INFRARED (NDIR) FIXED CH4 GAS TRANSMITTER Wuhan Cubic Optoelectronics Co. Ltd Add:Fenghuang No.3 Road, Fenghuang Industrial Park,Eastlake Hi-tech Development Zone,Wuhan 430205, China Tel: 86-27-81628831 Fax: 86-27-87405251 www. GasSensor.com.cn

WUHAN CUBIC Ot*TQtLJ6CTKQM*C5 CO^Ll D. leading NDIR technology coal mining. This operation and meet your monitoring demands.

■ Proprietary infrared gas analysis technology, with high accuracy, high resolution, long life and easy ■ High and low alarm settings, two levels of audio and light alarms; ■ Automatic zero calibration with ■ Fast response and Immune from ■ Audible alarm device to prevent accidents and ensure the safety of ■ Metal case for industrial online WUHAN CUBIC OrMUfcLfcCThvJr*iCi> CU,. I L.. 1 - Power cord port

SPECIFICATION Measuring method Power supply Measurement range:0-5%vol, resolution is 0.01%; Measurement range:0-100%vol, resolution is 0.1%; For range 0-1%,≤±0.1%; For range 1-100%,≤±10% of reading Zero repeatability Zero drift Working Temp Storage Temp Warming time Digital: RS485, 2 way TTL level; Analog : 4 ~ 20ma Setting Alarm Default: low alarm 20% LEL, high alarm 50%LEL, user adjustable Sampling method Diffusion sampling

APPLICATION CH4 Fixed gas transmitter for point-source hazards and perimeter protection in arduous duty and exposed locations. Safety protection for methane gas risk occurring in hazardous areas and general industrial applications: Petrochemical processing. Mining, metallurgy Fuel gas transport, as well as the leakage of nature gas Power generation. Gas storage and distribution. Marine and cargo handling. Telecommunications, oil wells.

Transmitter mounting height is decided by the measured gas weight ratio. If the measured gas is less than air, the transmitter is usually installed in the up place, 30cm from the ceiling; if the ceiling is high (higher than 5 meters), the proper installation height should be considered by the gas leakage speed; Transmitter installation place is determined by gas leakage source and working structure. 1) Firstly to check the area of working place and possible leakage points to determine required quantity of gas detector. In general, the detection probe radius of 7.5 m indoor; outside radius of...

INSTRUMENT CONFIGURATIONS Item Remote controller Operate detector Calibration cover Expansion bolt