*mydirectindustry

Catalogs
Cubic Sensor and Instrument Co.,Ltd
DLCO gas sensor for DLCO spirometer Gasboard-2050

DLCO gas sensor for DLCO spirometer Gasboard-2050

Product catalog summary

Overview
The document describes the DLCO Gas Sensor by Cubic Sensor and Instrument Co., Ltd., designed for measuring carbon monoxide (CO), methane (CH4), and carbon dioxide (CO2) concentrations using non-dispersive infrared (NDIR) technology. It highlights the sensor's high precision, fast response, and stability.

Key Features

Four-channel detector for CO2, CO, CH4, and a reference channel.
High accuracy with ±1% full scale (FS).
Fast response time (T90 < 300 ms at 1L/min flow rate).
Mechanical chopper modulation for light source stability.
Simple structure and easy maintenance.

Applications
The sensor is suitable for use in hospitals, clinics, diagnostic laboratories, and medical centers for respiratory gas analysis, aiding in the detection of pulmonary diseases such as COPD, asthma, and chronic shortness of breath.

Specifications

Operating Principle: NDIR
Measuring Targets: CO, CH4, CO2
Measurement Range: CO and CH4: 0~3500ppm (0~0.35%vol), CO2: 0~10%vol
Accuracy: ±1% FS
Resolution: CO and CH4: 1 ppm, CO2: 10 ppm
Warm-up Time: 30 minutes
Response Time: T90 < 300ms @ 1L/min, T90 < 450ms @ 500mL/min
Output Frequency: 16Hz
Digital Output: UART (TTL and RS232)
Dimensions: W183 x H65.6 x D70 mm

Contact Information
For further details, contact Cubic Sensor and Instrument Co., Ltd. at their Wuhan office via phone, fax, or email, or visit their website.

Catalog excerpts

DLCO gas sensor for DLCO spirometer Gasboard-2050-1

Diffusion Capacity for Carbon Monoxide of Lung(DLCO) Gas Sensor Cubic Sensor and Instrument Co.,Ltd.

Open the catalog to page 1

DLCO gas sensor for DLCO spirometer Gasboard-2050-2

Gasboard-2050 is a gas sensor for CO, CH 4 and CO 2 concentration measurements which is based on nondispersive infrared technology and with the advantages of high precision and fast response. Gasboard-2050 sensor uses an ultra-fast modulation frequency and a special detection circuit to improve the accuracy, stability and anti-interference ability of the measurements. With microcontroller processing, it achieves the functions of gas sampling, signal processing, sensor calibration and measurement output. It realizes the fast and accurate measurement of the ultra-low range gas CH 4 , CO and meets...

Open the catalog to page 2

DLCO gas sensor for DLCO spirometer Gasboard-2050-3

Specifications Operating Principle Measuring Target Measurement Range Warm-up Time Response Time Output Frequency Digital output Serial interface * For details of technical parameters, please refer to the speciﬁcation sheet. Hospital and clinics,Diagnostics laboratories,Medical center Respiratory gas analysis for detecting pulmonary diseases from exhaled breath(e.g Chronic Obstructive Pulmonary Disease(COPD), Asthma, Restrictive Lung Disease, Chronic Shortness of Breath). Add: Fenghuang No.3 Road, Fenghuang Industrial Park, Eastlake Hi-tech Development Zone,Wuhan, 430205, China Tel: +86-27-81628827...

Open the catalog to page 3

All Cubic Sensor and Instrument Co.,Ltd catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list