*mydirectindustry

Catalogs
Cubic Sensor and Instrument Co.,Ltd
Cubic Instruments Ultrasonic Flue Gas Flowmeter Gasboard-7900 Brochure

Cubic Instruments Ultrasonic Flue Gas Flowmeter Gasboard-7900 Brochure

1 / 2 PagesView full catalog

Cubic Instruments Ultrasonic Flue Gas Flowmeter Gasboard-7900 Brochure

Product catalog summary

Features

Designed for measuring acid or wet gas flow, unaffected by changes in gas composition.
Supports a wide range of measuring diameters from 0.3 to 12 meters.
Capable of measuring ultra-low flow rates with a detection limit as low as 0.1 m/s.
Configurable with one or more ultrasonic transceivers based on requirements.
Constructed with corrosion-resistant materials suitable for high temperature and corrosive flue gas conditions.
Equipped with a high-speed data processor for faster operation, including calibration, configuration, query, and diagnostic functions.

Specifications

Measuring Medium: Air, flue gas, and other non-combustible gases.
Applicable Stack Diameter: 0.3 to 12 meters.
Number of Measuring Channels: Single channel, with options for 2 or 4 channels.
Flue Gas Pressure Range: -10 to 10 Pa.
Flue Gas Temperature Range: -20 to 48°C.
Flue Gas Velocity Range: 0 to 40 m/s.
Accuracy Level: ±2.0%.
Environmental Temperature: -20 to 60°C.
Power Supply: AC 220V, 50/60Hz.
Power Consumption: 100W (Measuring Unit).
Signal Output: 4-20mA, RS-485.
Protection Grade: IP65.

Note: All products are in continuous development, and specifications may change without prior notice.

Contact Information: Hubei Cubic-Ruiyi Instrument Co., Ltd., No. 6, Fenghuangyuan Middle Road, Fenghuang Industrial Park, Eastlake Hi-tech Development Zone, Wuhan, China. Tel: +86-27-81628831, Fax: +86-27-87401159, Email: [email protected], Web: www.gas-analyzers.com

Catalog excerpts

Cubic Instruments Ultrasonic Flue Gas Flowmeter Gasboard-7900 Brochure-2

Suitable for acid or wet gas flow measurement, measurement result is not affected by gas composition changes. • Large measuring caliber range, support 0.3-12m stack diameter. • Ultra-low flow rates measurement with lower detection limit of O.lm/s. ■ It can be flexibly configured according to requirements, and one or more ultrasonic transceivers can be used for measurement. • Corrosion-resistant materials are used in the gas contact part of the whole machine, which can be used under high temperature and corrosion conditions of flue gas. • Using high-speed data processor for faster running speed,...

Open the catalog to page 2

All Cubic Sensor and Instrument Co.,Ltd catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list