CERTIFICATE OF COMPLIANCE(Portable Infrared Gas Analyzer)

1 / 1 PageView full catalog

CERTIFICATE OF COMPLIANCE(Portable Infrared Gas Analyzer)

Product catalog summary

Certificate of Compliance Overview

Applicant: Hubei Cubic-Ruiyi Instrument Co., Ltd, located in Wuhan, China.

Test Report Number: B-E180818854, conducted by Beide(Shenzhen) Product Service Limited.

Certification Details: The certificate number is IT1429CR21091812, issued by ISET S.r.l.

EC Directive Applied: Electromagnetic Compatibility 2014/30/EU.

Harmonized Standards Applied: EN 61326-1:2013.

Product Characteristics: The certificate covers the Online Infrared Gas Analyzer models: Gasboard-3100, Gasboard-3200, Gasboard-3110, Gasboard-3500, and Gasboard-3100Pro.

Remarks: The verification was conducted voluntarily, confirming that a Technical Construction File (TCF) is in place. The products meet the requirements of the ISET Certification Mark. The CE marking must be at least 5mm in height and is the manufacturer's responsibility before market release.

Validity: The certificate was issued on 21/09/2018 and expired on 20/09/2023.

Catalog excerpts

CERTIFICATE OF COMPLIANCE(Portable Infrared Gas Analyzer)-1

ISET S.r.l. Sede Legale e Uffici Via Donatori di sangue, 9 - 46024 Moglia (MN) Tel. e fax +39 (0)376 598963 [email protected] www.iset-italia.eu Cap. soc. i.v. Cod. Fisc. e P.IVA Reg. Imprese REA CERTIFICATE OF COMPLIANCE Certificado de Conformidade - Сертификат соответствия - Konformitä tserklä rung 1) APPLICANT: Hubei Cubic-Ruiyi Instrument Co.,Ltd Fenghuang No.3 Road, Fenghuang Industrial Park, Eastlake Hi-tech Development Zone,Wuhan, 430205, China 3) WITH REFERENCE TO EC DIRECTIVE APPLIED: Electromagnetic Compatibility 2014/30/EU 4) CERTIFICATION ISET MARK: TEST REPORT(S) NO.: B-E180818854 Beide(Shenzhen) Product Service Limited HARMONIZED STANDARDS APPLIED: EN 61326-1:2013 5) PRODUCT CHARACTERISTICS: Online Infrared Gas Analyzer MODEL(S): Gasboard-3100,Gasboard-3200, Gasboard-3110, Gasboard-3500, Gasboard-3100Pro REMARK: The verification has been carried out on a voluntary basis. We attest that a TCF is in place. The product(s) satisfies the requirements of the Certification Mark of ISET, in reference to the above list standard(s). The above compliance mark can be fixed on the product(s) according to the ISET regulation about its release. This verification doesn’t imply assessment of the production and the product(s). Notice of the CE marking: The label of the CE marking: Not less than 5mm height. Before putting the product(s) into market, CE marking and EC declaration are duties of the manufacturer. The manufacturer is responsible to start the CE marking certification procedure and to perform the activities according to all the relative directive(s). CERTIFICATION MANAGER:

Open the catalog to page 1