CERTIFICATE OF COMPLIANCE(Online Infrared Gas Analyzer)

Product catalog summary

Certificate Overview: This document is a Certificate of Compliance issued by ISET S.r.l. for Hubei Cubic-Ruiyi Instrument Co., Ltd. It certifies that specific models of portable infrared gas analyzers comply with European directives and standards.

Applicant Information: The applicant is Hubei Cubic-Ruiyi Instrument Co., Ltd, located in Wuhan, China.

Certification Details: The certificate number is IT1429CR21091811. The certification references the Low Voltage Directive 2014/35/EU and the Electromagnetic Compatibility Directive 2014/30/EU. Harmonized standards applied include EN 61010-1:2010 and EN 61326-1:2013.

Product Characteristics: The products covered are portable infrared gas analyzers, specifically models Gasboard-3100P, Gasboard-3200L, Gasboard-3110P, Gasboard-3500P, and Gasboard-3400P.

Remarks: The verification was conducted voluntarily, and a Technical Construction File (TCF) is in place. The products meet the requirements for the ISET Certification Mark. The CE marking must be at least 5mm in height and is the manufacturer's responsibility before market release.

Validity: The certificate was issued on 21/09/2018 and expired on 20/09/2023.

Catalog excerpts

CERTIFICATE OF COMPLIANCE(Online Infrared Gas Analyzer)-1

ISET S.r.l. Sede Legale e Uffici Via Donatori di sangue, 9 - 46024 Moglia (MN) Tel. e fax +39 (0)376 598963 [email protected] www.iset-italia.eu Cap. soc. i.v. Cod. Fisc. e P.IVA Reg. Imprese REA CERTIFICATE OF COMPLIANCE Certificado de Conformidade - Сертификат соответствия - Konformitä tserklä rung 1) APPLICANT: Hubei Cubic-Ruiyi Instrument Co.,Ltd Fenghuang No.3 Road, Fenghuang Industrial Park, Eastlake Hi-tech Development Zone,Wuhan, 430205, China 3) WITH REFERENCE TO EC DIRECTIVE APPLIED: Low Voltage Directive 2014/35/EU Electromagnetic Compatibility 2014/30/EU 4) CERTIFICATION ISET MARK: TEST REPORT(S) NO.: B-E180818856, B-E180818857 Beide(Shenzhen) Product Service Limited HARMONIZED STANDARDS APPLIED: EN 61010-1:2010 EN 61326-1:2013 5) PRODUCT CHARACTERISTICS: Portable Infrared Gas Analyzer MODEL(S): Gasboard-3100P , Gasboard-3200L, Gasboard-3110P, Gasboard-3500P, Gasboard-3400P REMARK: The verification has been carried out on a voluntary basis. We attest that a TCF is in place. The product(s) satisfies the requirements of the Certification Mark of ISET, in reference to the above list standard(s). The above compliance mark can be fixed on the product(s) according to the ISET regulation about its release. This verification doesn’t imply assessment of the production and the product(s). Notice of the CE marking: The label of the CE marking: Not less than 5mm height. Before putting the product(s) into market, CE marking and EC declaration are duties of the manufacturer. The manufacturer is responsible to start the CE marking certification procedure and to perform the activities according to all the relative directive(s). CERTIFICATION MANAGER:

Open the catalog to page 1