Catalogs >
Cubic Sensor and Instrument Co.,Ltd >
Air quality monitor AM7000

Air quality monitor AM7000
1 / 11Pages

Catalog excerpts

Product Manual

1、 Preface 2、 Packing list 3、 Product introduce 4、 Instructions 5、 Common problem guidelines 6、 After-sales service and con

Open the catalog to page 2

1、Preface Thank you for purchasing the AM7000 air quality monitor. This product can detect six indicators of indoor-temperature, humidity, PM2.5, CO2, formaldehyde and VOC. Please read the instructions carefully before use and pay attention to all precautions. After reading, please keep it in a safe place for reference at any time. User Notice  Please use 5V/1A power adapter, otherwise it may cause overheating, explosion and other accidents due to excessive current；  Do not insert sharp metal tools into the ventilation holes of the housing, otherwise it will cause damage to the sensor or...

Open the catalog to page 3

oil fume, corrosive indoor environments, etc. If the monitor exposed to high-concentration gas for a short time, it may cause the formaldehyde sensor to fail temporarily. Then the product must be placed in a clean and ventilated environment to recover. The recovery time may be as long as 1 to 2 days;  Please do not block the vent slot when the product is in use, so as not to affect the measurement accuracy;  The formaldehyde sensor used in this product has the characteristics of high sensitivity, so it requires a stable detection environment and eliminates major interferences: including...

Open the catalog to page 4

* The icon is only displayed when configured with a WIFI module. Display area *The icon is only displayed when the product is configured with a Bluetooth modul

Open the catalog to page 5

Formaldehyde/VOC Module *Used for manually calibration of CO2 and HCHO Micro USB power port Particle sensor air inlet 3.2 Technical parameter of sensor Indictor Measurement Range 0~40℃ ±1℃ Temperature （Measured after 30 minutes under stable environment for 25±2℃, 50± 10%RH） Measurement Range 0~95%RH Accuracy Measurement Range

Open the catalog to page 6

Upgrade Range Measurement Range 400~5000ppm Accuracy CO2 Grade range Measurement Range 0~1.000mg/m3 ≤0.100mg/m3：±0.03mg/m3 ＞0.100mg /m3：±30% of readings Accuracy Formaldehyde （Refer to Gasera one， measured after 2 minutes under stable environment, 25± 2℃, 50±10%RH） Excellent：0~0.03mg/m3 Upgrade Range

Open the catalog to page 7

Good：1 Bad：2、3 Note: In the display interface, the background color block of CO2 and formaldehyde, the surrounding color circle of PM2.5, and the grade color block of VOC all have three states: green, yellow, and red, representing the excellent, good, and bad of each indicator. And the VOC grade color block is divided into 4 segments, corresponding to 0~3 grades respectively. When the formaldehyde/VOC module is not installed, the color block is gray. 3.3 Product Information Product Type Working condition Storage Condition Rated voltage Wireless module* *The wireless module is an optional...

Open the catalog to page 8

open and take out the formaldehyde/VOC； ② Turn over and uncover the rear cover from the gap at the bottom of the product； ③ Insert the formaldehyde/VOC module into the corresponding USB socket on the product； ④ Insert the top buckle of the rear cover into the corresponding hole on the top of the product, and fix it with the magnet at the bottom. 4.2 Supply power to the product through the power cord, and display the air quality test after warming up data. 4.3 Disassemble the formaldehyde/VOC modu

Open the catalog to page 9

formaldehyde/VOC module is a consumable material, if the product is not used for long time, the formaldehyde/VOC module should be disassembled and installed in primary aluminum foil bag, to extend the life span of the formaldehyde/VOC module. When disassemble the formaldehyde/VOC modules, use the fingers on the built-in handle to turn the handle over, and then use the handle to take out the module. 5、Common problem guidelines Problem description Solve Method ①Confirm whether the product is correctly connected to the power supply, and power Black Screen, no display adapter whether meets the...

Open the catalog to page 10

aromatic gases, containing alcohol, fermented products, etc.), alcohol and alcohol-containing items, frequent walking, etc. 6、After-sales service and consultation Cubic Senesor and Instrument Co.,Ltd Address: Fenghuang No.3 Road, Fenghuang Industrial Park, Eastlake Hi-tech Development Zone, Wuhan, 430205, China. Phone: +86 (0) 2781628813 Fax: +86 (0) 2787401159 Web: www.gassensor.com.cn Email: info@gassensor.com.cn

Open the catalog to page 11