Ruiyi Online Infrared flue gas analyzer Gasboard-3000

Product catalog summary

Measurement Methods
The Gasboard 3000 utilizes proprietary infrared NDIR detectors for measuring CO, NO, and SO2 in ppm ranges and CO2 in percentage volume ranges. An electrochemical detector is used for O2 measurement, with an optional paramagnetic sensor available. A catalytic converter is employed for NOx measurement by converting NO2 to NO.

General Features
The analyzer features micro-flow NDIR gas sensor technology, unaffected by gaseous water or sampling flow rate fluctuations. It provides accurate low concentration gas measurements, includes a built-in zeroing pump, and offers RS232 and 4-20mA outputs. The device has a large LCD display and a keyboard interface for setup and calibration, along with a flow meter for gas flow regulation.

Applications
The Gasboard 3000 is suitable for monitoring boiler and furnace exhaust emissions, cement production line processes, and continuous emission monitoring systems (CEMS).

Measurement Range and Accuracy
The analyzer measures NO, CO, and SO2 from 0-500 to 0-5000 ppm with a resolution of 1 ppm and CO2 from 0-5% to 0-100% with a resolution of 0.01%. O2 is measured from 0-1% to 0-100% with a resolution of 0.01% using a paramagnetic detector or 0-5% to 0-100% using an electrochemical sensor.

Technical Specifications
The device is housed in a 19’’ - 3U rack enclosure, weighing approximately 12 kg, and operates on 220VAC/50Hz or 115VAC/60Hz power supply. It features a 320x240 LCD display, 4-20mA analogue output, RS232 communication, and digital relays for gas alarms. The gas sampling system includes an external pump, with a nominal gas flow of 0.7 to 1.2 L/minute.

Operating Conditions
The analyzer operates within a temperature range of 0-50°C, relative humidity of <=95% RH, and ambient pressure of 86-108 kPa. It has a response time of less than 10 seconds for NDIR-TCD, less than 12 seconds for PMG, and less than 15 seconds for electrochemical O2.

Typical Applications
Applications include safety monitoring in coal milling, efficient control and emission reduction in cement production, and environmental monitoring in CEMS.

Gas Conditioning System
The system includes components such as a gas cooler, compressed chiller, sampling pump, water condenser, peristaltic pump, and electromagnetic valve.

Advantages
The Gasboard 3000 addresses interference from water vapor on SO2 and NO measurements using micro-flow infrared sensors and a special compensation mechanism. It also employs temperature correction methods to mitigate environmental influences on measurement accuracy.

Catalog excerpts

Ruiyi Online Infrared flue gas analyzer Gasboard-3000-1

Online Infrared Flue Gas Analyzer Gasboard 3000 0CO C°2 SO2 NON° Measurement Methods • Proprietary Infrared NDIR Detectors - Micro-flow in ppm range: CO, NO, SO2 - Dual beam in % volume ranges: CO2 •Electrochemical Detector for O2 % range (optional paramagnetic sensor) •Catalytic Converter for NOx in ppm range (NO2 to NO conversion) Applications □ Boiler, furnace exhaust emission gas and combustion efficiency monitoring. □Cement production line process and security monitoring. □Continuous Emission Monitoring System (CEMS). General Features •Adopting micro-flow NDIR gas sensor technology. •Gaseous water had no effect on SO2 and NO reading value. •Sampling flow rate fluctuations had no effect on the measurement results. •Accurate measurement of low concentration gas. •Built-in zeroing pump. •RS232 and 4-20mA output. •Large LCD display (320 * 240). •Keyboard interface for set-up and calibration . •Flow meter with needle valve for gas flow regulation .

Open the catalog to page 1

Ruiyi Online Infrared flue gas analyzer Gasboard-3000-2

Measurement Range and Accuracy Gas NDIR micro-flow detector NO 0-500PPM 0-5000PPM 1PPM ±2% Industrial electrochemical sensor O2 0-5% 0-100% 0.01% ±3% Flue gas analyzer Gasboard 3000 for fast delivery

Open the catalog to page 2

Ruiyi Online Infrared flue gas analyzer Gasboard-3000-3

Technical Specifications Enclosure Dimension Weight Power supply Display 19'' - 3U rack enclosure : 485*457*132 mm Depending on gas configuration : about 12 Kg 220VAC/50Hz or 115VAC/60Hz LCD 320*240 display I/O Analogue Communication Digital Gas Alarms Configuration and calibration 4-20mA linear output signal per measuring channel RS232 for real time data download (.txt files) to an external PC (software is part of the delivery) 3 common relays for default, low and high gas alarms 2 gas alarms (low and high) per channel, configurable by software By software, via key path interface on the front...

Open the catalog to page 3

Ruiyi Online Infrared flue gas analyzer Gasboard-3000-4

Typical Applications 1. Processing monitoring in metallurgy Places Places Use Range

Open the catalog to page 4

Ruiyi Online Infrared flue gas analyzer Gasboard-3000-5

Online flue gas monitoring system Gas route diagram

Open the catalog to page 5

Ruiyi Online Infrared flue gas analyzer Gasboard-3000-6

Compressed chiller Sampling pump Electromagnetic valve Water condenser Peristaltic pump Analysis cabinet

Open the catalog to page 6

Ruiyi Online Infrared flue gas analyzer Gasboard-3000-7

Why should be Gasboard 3000 ? 1. How to solve the inference from water vapor to SO2 and NO? The traditional double-beam infrared gas sensor technology due to the impact of filter bandwidth, SO2, NO and water vapor IR absorption peaks overlap, cross-infection is very serious. Experimental results show: 4 ℃ in the flue gas water vapor saturation SO2, NO measurement results of up to 50-100ppm. Infrared gas sensors using micro-flow, while the water allocation of special compensation mechanism, to a large extent resolved gaseous water on SO2, NO interference problems, after testing and validation,...

Open the catalog to page 7