Testing Instrumentation Gasboard 5020 for exhaust gases from petrol or LPG engines GASBOARD 5020 is an analyser for the control of exhaust gases from gasoline or LPG engines; it integrates non dispersive infrared (NDIR) detectors for the measure of CO, CO2, HC and electrochemical sensors (ECD) for O2 and NO. General Features Simultaneous measure and display of , , , , , p CO, CO2, NO, HC, O2, Oil temperature and engine rotation speed (RPM) Calculation and display of air/fuel ratio (Lambda) Automatic leak test of the sampling line Selection of fuel: petrol, LPG, Natural Gas, PET (C3/C6), user specific fuel Interface for connecting an external oil temperature measuring probe Automatic calibration of the oil temperature measuring probe Interface for connecting a tachometer (engine rotation speed); measure based on the analysis of vibration and noise. 6‐button keypad for configuration and calibration of the analyser Automatic zero calibration with ambient air (recommended through external in‐line HC filter) Water/dust filter on the rear plate of the analyser Integrated printer,Data logger by RS232 Ambient te

Measurement range

Opacity Meter Gasboard 6010 GASBOARD 6010 opacity meter is used to measure the diesel exhaust smoke by the introduction of a proportion of the vehicle exhaust gasses into the smoke check chamber via a sample probe. It is equipped with a gas temperature, pressure valve and distribution control cell in order to ensure accuracy and repeatability. It can measure the complete General Features: Free accelerative and transient state measurement of opacity for diesel engine. Display of Smoke opacity degree and Display of Smoke opacity degree and Light absorption coefficient. Partial flow technology to keep optic ...

Engine RPM Sensor Based on Vibration and Noise Gasboard 8110 Engine type Measuring range diesel：450～6000 rpm serial output, analog voltage signal output Signal output TTL signal pulse output；induced pulse ‐analog ignition signal Operating humidity Operating humidity

Engine RPM Sensor Based on Cigar Lighter Gasboard 8010 General Features: Used for engine's RPM measurement of gasoline, diesel, and natural gas. Directly connected to Cigar lighter or battery to measure its RPM without any sensor. RS‐232 interface and LCD display. Universal, connective to any exhaust Specifications: Power source: Cigar lighter or battery 9‐ 15 VDC Measure Target: 2,4 stroke,1‐12 cylinder Measure Target: 2 4 stroke 1 12 cylinder Measurement range :400‐ 9,999 RPM Maximal error:< 20 RPM or relative 1 % Response time: < 1 second gas analyzer and Opacity meter. Standard signal interface Such as TTL ...

* Pictures are provided by CUBIC distribut