Automobile Emission Gas Monitoring Technologies and SolutionsCubic Instruments (Wuhan) Ltd Add: No. 6, Fenghuangyuan Middle Road, Fenghuang Industrial Park, Eastlake Hi-tech Development Zone, Wuhan, China E-mail: [email protected] All products are in continuous development and therefore specifications may be subject to change without prior notice. Automobile Emission Gas Analyzer Opacity Meter Portable Particle Counter Vehicle Headlight Tester Engine Tachometer based on Vibration # Portable Emission Measurement System # Constant Volume Sampling (CVS) System
Open the catalog to page 1Cubic Instruments (Wuhan) Ltd. (hereinafter referred to as "Cubic Instruments") is a wholly-owned subsidiary of Cubic Sensor and Instrument Co., Ltd.(stock code 688665.SH). Established in 2010, Cubic Instruments is a high-tech enterprise specializing in providing gas composition and gas flow measurement solutions in the fields of environmental monitoring, process gas monitoring and smart metering. Based on the advantages of Cubic core gas sensing technology platform, Cubic Instruments has developed a series of gas analyzers that utilize advanced technical principles such as non-dispersive infrared...
Open the catalog to page 2[fe NOx MEASUREMENT TECHNOLOGIES COMPARISON Indirect Measurement by Converter 0 0 0Micro-flow NDIRAdopts converter to transfer N02 to NO, and indirectly obtain the N02 and NOx concentration by measuring NO. • Measurement accuracy is greatly affected by conversion efficiency. • One analyzer plus one converter leads to complicated operation. • Regular replacement of catalyst causes cost increasing. UV-DOAS Direct Measurement by Optical Gas Sensor Direct measurement of NO and N02 concentration, and calculate total reading of NOx. NDUV • Higher measurement accuracy • No consumables needed, maintenance...
Open the catalog to page 3Engine Exhaust Measurement System Gasboard-9801 Vmas Emission Gas Flow Meter Gasboard-7800 Constant Volume Sampling System Gasboard-9802 CONTENT Portable Emission Engine Exhaust Measurement System Measurement System Automobile Emission Gas Analyzer Portable Particle Counter Opacity Meter Engine Tachometer based on Vibration Headlight Tester
Open the catalog to page 4Portable Emission Measurement System Gasboard-9805 Self-developed Gas Analysis Technologies Modular Design, Flexible to Use Cubic Instruments Gasboard-9805 is a Portable Emissions Measurement System (PEMS) which is used to measure emissions from combustion engines in real driving.lt utilizes three different PEMS modules, including PEMS-GAS for measuring the concentrations of gas emissions (CO, C02, THC, NO, N02), PEMS-PN for measuring particulate matter, and PEMS-EFM for measuring exhaust flow rate. As part of the basic measurements, Gasboard-9805 can also collect location data by a GPS (Global...
Open the catalog to page 5Engine Exhaust Measurement System Gasboard-9801 ©Continuous online measurement for diluted exhaust and raw exhaust gas with high accuracy and fast response. Gasboard-9801 Engine Exhaust Measurement System is independently developed by Cubic Instruments, it is an integrated system specifically designed for measuring exhaust gas components such as THC, CH4, NOx, C02, CO, 02 and additional NH3, N20 for upcoming EURO 7 standard request in laboratory for full-flow dilution sample gas or raw exhaust emission gases testing. It incorporates functional modules including sampling unit, gas conditioning...
Open the catalog to page 6CVS Flow Rate CVS Temperature Control Air Bag Sampling Flow Rate CVS Configuration Particle Sampling Flow Constant Volume Sampling (CVS) System Gasboard-9802 ©Combined with the constant temperature control function of the heat exchanger and the air bag cabinet, it effectively prevents the condensation of diluted exhaust. Constant Volume Sampler The Gasboard-9802 full-flow dilution constant volume sampling (CVS) system is designed for the measurement of diluted emissions from vehicles and engines. It has a complete and technologically advanced hardware configuration and software platform. When...
Open the catalog to page 7Portable Particle Counter Gasboard-6200 ttl Specifications CUBIC Portable Particle Counter is designed to measure the particle number of fine particles in automotive exhaust gas. Based on DC (Diffusion Charge) principle, the portable particle counter determines the number of particles by measuring the charge carried on particles in sample gas. The exhaust gas can be directly measured, no need for filtration and dilution, ensuring long-term clean operation and reducing the maintenance costs effectively. The portable particle counter is designed with features of high sensitivity, high accuracy,...
Open the catalog to page 8Automobile Emission Gas Analyzer Gasboard-5020 Specifications Gasboard-5020 emission gas analyzer is designed for measuring the emissions of all gasoline, LPG and CNG vehicles. It is developed based on non-dispersion infrared (NDIR) principle to measure CO, CO2, HC, and electrochemical sensors to measure O2 and NO. The test reports can be printed on the built-in printer. Gasboard-5020 is equivalent to OIML R99 classO standard and is very suitable for exhaust inspection of light and heavy vehicles such as automobiles and motorcycles, and then optimizing their exhaust. ■ Automotive inspection station...
Open the catalog to page 9I Online Automobile Emission Gas Analyzer I Online Automobile Emission Gas Analyzer Gasboard-5230 Automobile Emission Gas Analyzer adopts micro flow NDIR principle with independent intellectual property and international PCT (CN2018100767) to detect NO concentration. The analyzer uses dual channel structure and special filters to resolve the problems such as environmental temperature instability and electronic component aging. Gasboard-5230 adopts the NDIR principle todetect C02 concentration and the NDUV principle to detect NO concentration without an NOx converter. Features Gasboard-5260 Automobile...
Open the catalog to page 10Gasboard-6010 adopts leading partial flow technology to protect optical system and is developed to measure visible pollutants emitted from compression ignition engines or vehicles equipped with compression ignition engines. I Engine Tachometer based on Vibration Gasboard-8220 adopts an advanced hardware design together with integrated software analysis technology to measure RPM through vibration and audio spectrum signal, and transfers data to emission gas analyzers, opacity meters and other machines. Features Features ■ Simultaneously displaying K and N value ■ Partial flow technology to avoid...
Open the catalog to page 1112 Pages