Skived fin heat sinks Highest performance single-piece solutions When producing skived fin heat sinks, the cooling fins are carved out of a solid block More infos: of aluminium or copper. This heat sinks are created with a highly dense cluster of especially fine fins. The seamless transition of the single-piece design eliminates any additional thermal resistance between the fins and the heat sink base. The heat sinks provide a correspondingly high performance density. As this process does not involve any tooling costs, it is also suitable for single pieces and small series. Because of their high fin density, skived fin heat sinks are used in combination with system fans for forced cooling. Skived fin heat sinks from CTX: Especially high specific performance density Low tool costs Suitable for small series High fin density Particularly thin and long fins possible Can be combined with system fans CTX Thermal Solutions GmbH Lötscher Weg 104 | D-41334 Nettetal | Telephone: +49 2153 7374-0 | Fax: +49 2153 7374-10 | E-mail: [email protected] | www.ctx.eu

Expert thermal management for your electronics More infos: CTX is specialised in perfectly fitting active and passive cooling solutions for electronics for more than 25 years. We implement application-specific cooling units and cooling electronics housings for our customers from almost every field of industry. Our wide product range makes us to one of the leading suppliers in Europe. We support you from the initial idea to series production when you implement your cooling solution. In the process, we draw on a vast range of manufacturing techniques together with an exceptionally broad supplier...