09VR
8Pages

Series 09VR 9mm Panel Potentiometer ▪ ▪ ▪ ▪ ▪ Miniature 9 mm package size Rotational life (5,000 cycles) Wide temperature range (-10°C to +70°C) Mechanical travel options (280° and 300°) Variety of standard resistances and tapers Consumer portable electronics Commercial appliances Instrument amplifiers and guitar effects Keyboards and synthesizers Communications equipment Ordering Information Series Terminal Configuration Shaft Length Ordering Information 09VR 1 M Code M Shaft Trim Mechanical Travel Detent Option Resistance Code Resistance Taper No Detent Center Detent Knurled (18 teeth) Flatted Knurled (40 teeth) Code Spec.** Horizontal/Side Mount Bushingless, PC Pins, 6.5mm Height Horizontal/Side Mount Sleeve Bushing, PC Pins, 6.5mm Height Horizontal/Side Mount Thread Bushing, PC Pins, 6.5mm Height Vertical/Rear Mount Thread Bushing, PC Pins Vertical/Rear Mount Sleeve Bushing, PC Pins Vertical/Rear Mount Bushingless, PC Pins * See shaft trim options for available lengths on next page. ** Other JIS tapers are available. See charts. ©2022 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s),

Series 09VR 9mm Panel Potentiometer Available Shaft Trim Combinations by Terminal Configuration And Shaft Length Shaft Trim Shaft 15mm Shaft 20mm length Shaft 25mm Shaft 30mm Options length length length 09VR1SKnurled (18 teeth)• Flatted•• Knurled (40 teeth) • • 09VR1HKnurled (18 teeth)• Flatted•• Knurled (40 teeth) • • 09VR1KKnurled (18 teeth)•• Flatted••• Knurled (40 teeth) • • • Total Resistance Tolerance -20 Power Rating - Operating Voltage - Residual Resistance - Slider Noise - Dielectric Strength 250 VAC for 1 min. no arcing Taper Linear and audio options (see charts) Total Mechanical...

Mounting Hardware Packaging Weight_ Series 09VR9mm Panel Potentiometer One flat washer and one mounting hex nut supplied with bushing option Bulk. For Thread Bushing terminal (09VR1S, 09VR1H) furnish with washer and nut in separate package. 2 grams Environmental _ _MinTypicalMaxUnit Soldering Conditions Wave Solder Preheat: 100°C max for 2 min max; Solder temperature: 260°C ± 5°C for 5 sec max.; No clean foam flux recommended Manual Solder 350°C ± 5°C for 3 sec max.; Sn95Ag5 no clean solder Moisture Sensitivity Level 1 All testing is performed at room ambient conditions except as noted....

Series 09VR 9mm Panel Potentiometer CCS Mechanical Specifications Series 09VR1M Horizontal/Side Mount Bushingless Series 09VR1U Vertical/Rear Mount Bushingless SHAFT SHOWN IN CENTER POSITION □R CENTER CLICK POSITION LENGTH Unit: mm 280° ROTATION 300° ROTATION SHAFT SHOWN IN FULL CCV POSITION TOLERANCES UNLESS OTHERWISE SPEC ©2022 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request...

Series 09VR 9mm Panel Potentiometer Mechanical SpecificationsSeries 09VR1B Horizontal/Side Mount Sleeve Bushing SHAFT SHOWN IN CENTER POSITION OR CENTER CLICK POSITION Series 09VR1K Vertical/Rear Mount Sleeve Bushing SHAFT SHOWN IN CENTTR POSITION DR CENTER CLICK POSITION TOLERANCES UNLESS OTHERWISE SPEC SHAFT SHOWN IN FULL CCW POSITION ©2022 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information,...

Series 09VR 9mm Panel Potentiometer Mechanical Specifications Series 09VR1S Horizontal/Side Mount with Threaded Bushing Series 09VR1H Vertical/Rear Mount with Threaded Bushing ©2022 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote

Series 09VR 9mm Panel Potentiometer Mechanical Specifications40 Tooth Knurl Shaft Trim Option LENGTH SHAFT SHOWN IN FULL CCW POSITION 18 Tooth Knurl Shaft Trim Option 2022-07-15 Rev. E ©2022 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.

Series 09VR 9mm Panel Potentiometer Electrical Specification Series 09VR Taper Graphs ©2022 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.