Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. CSM GmbH
  3. HV TH-TBM

HV TH-TBM

HV TH-TBM
1 / 4 PagesView full catalog

HV TH-TBM

Product catalog summary
Overview: The HV TH-TBM modules are high-voltage measurement modules designed for temperature measurements in electric and hybrid vehicles. They are suitable for both test bench applications and mobile use.
Key Features:
  • NiCr-Ni temperature inputs (K type), galvanically isolated.
  • Reinforced insulation up to 800 V unipolar.
  • Type approval test according to EN 61010 safety standard.
  • High measurement accuracy under challenging conditions.
  • Internal cold junction compensation per channel.
  • Low power consumption.
  • Operating temperature range: -30 °C to +70 °C (HV TH-TBM 8 /50) and -40 °C to +85 °C (HV TH-TBM 8 /65).
  • Robust aluminium housing.
Shipping Content:
  • Measurement module HV TH-TBM.
  • Configuration software CSM ConfigTool.
  • Documentation and calibration certificate.
  • HV isolation test certificate.
Maintenance:
  • HV isolation test according to EN 61010 every 12 months.
  • Calibration recommended every 12 months.
Technical Data:
  • Measurement inputs: 8 NiCr-Ni (K type).
  • Measurement ranges: -100 °C to +1372 °C.
  • Internal resolution: 16 bit.
  • Sampling rate per channel: 1 kHz.
  • Measurement data rate per channel: 1, 2, 5, 10 Hz.
  • Reinforced insulation: 800 V unipolar.
  • CAN interface: CAN 2.0B, High Speed, 125 kbit/s to 1 Mbit/s.
  • Power supply: 6 V DC to 50 V DC.
  • Power consumption: 2.0 W.
Operating and Storage Conditions:
  • Operating temperature range: -30 °C to +70 °C (HV TH-TBM 8 /50) and -40 °C to +85 °C (HV TH-TBM 8 /65).
  • Relative humidity: 5% to 80% (non-condensing) for HV TH-TBM 8 /50 and 5% to 95% (non-condensing) for HV TH-TBM 8 /65.
  • Operating altitude: max. 5,000 m.
Additional Products:
  • HV THMM 4: Designed for safe temperature measurements on high-voltage components.
  • THMM and PTMM modules: For temperature measurements with thermocouples and PT100/PT1000 elements.
See more

Catalog excerpts

HV TH-TBM-1

Temperature measurements on high-voltage components HV TH-TBM modules belong to the series of high-voltage measurement modules which have been specifically developed for temperature measurements in the area of e-mobility (electric and hybrid vehicles). Designed as 19-inch slide-in units, both versions are excellently suited for test bench applications. The HV TH-TBM 8 /65 is also applicable for mobile use in all types of vehicles, such as mounting in the trunk of a car. ff NiCr-Ni temperature inputs (K type), galvanically ff Reinforced insulation up to 800 V unipolar ff Type approval test according to safety standard EN 61010 by an accredited test laboratory ff Very good measurement accuracy under challenging temperature ranges and environmental conditions ff Internal cold junction compensation per channel ff Very low power consumption ff Operating temperature range: ff Robust aluminium housing (19 inch 3 U / 12 HP) Shipping content ff Measurement module HV TH-TBM ff Configuration software CSM ConfigTool ff HV isolation test according to EN 61010 at least ff Calibration every 12 months recommended ff Calibration certificate in accordance with ff HV isolation test certificate ff See datasheet “CSM MiniModule Accessori

 Open the catalog to page 1
HV TH-TBM-2

Technical data Type designation Measurement inputs Measurement ranges Internal resolution Internal sampling rate per channel Measurement data rate per channel FIR filter (Finite Impulse Response) threshold frequency automatically adjusted to measurement data rate Broken sensor detection Cold junction compensation yes internal reference per channel Measurement uncertainty at 25 °C Temperature drift max. ±(0.05 % of measured value + 0.3 K) max. ±(10 ppm/K + 4 mK/K) Reinforced insulation Channel / channel Channel / power supply Functional insulation CAN / power supply CAN interface Configuration...

 Open the catalog to page 2
HV TH-TBM-3

Type designation Aluminium with HV designation on the front-side (RAL2003) Protection class Ground connection Mounting approx. 600 g 12 HP (approx. 61 mm) 3 U (approx. 129 mm) 100 mm 12 HP (approx. 61 mm) 3 U (approx. 129 mm) 100 mm (+ 25 mm protective bracket) Connectors CAN / power supply LEMO 0B, 5-pole, code G NiCr-Ni multi-connectors1) Signal inputs Operating and storage conditions Operating temperature range Relative humidity Operating Altitude Pollution degree Storage temperature Conformity Device safety 1 HV TH-TBM measurement modules are also available with single-channel input connectors....

 Open the catalog to page 3
HV TH-TBM-4

Raiffeisenstraße 36 • 70794 Filderstadt • Germany Phone: +49 711 - 7 79 64-20 • Fax: +49 711 - 7 79 64-40 [email protected] • www.csm-products.com All trademarks mentioned are property of their respective owners. This document is subject to change without notice. Copyright © 2015 CSM Computer-Systeme-Messtechnik GmbH HV_TH

 Open the catalog to page 4

All CSM GmbH catalogs and technical brochures

  1. OmniDrive USB2 Professional
    OmniDrive USB2 Professional

    2  Pages

  2. HV THMM 4
    HV THMM 4

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.