Pneumatic: ideal for chipping and removing metal, stone, concrete and brick, as well as carving wood • Use in oilfields, fabrication shops, petrochemical plants, construction sites and foundries • Chisel scalers are general-purpose hammers for chipping stone, metal, concrete, brick and Model CSU-182LCS for carving wood Scaling Hammer with Lever Throttle • Needle scalers are ideal for removing weld Gooseneck handle and push throttle hammers also available. splatter, rust, paint and other debris from many surfaces and hard-to-reach places Non-sparking Needles – CuBe Copper Beryllium non-sparking needles available for CSU-182LNS and CSU-1BLNS. Model CSU-182LNS Needle Scaler with Lever Throttle Ex308-319B - 7" long needle, 19 per pack Ex308-3100B - 7" long needle, 100 per pack Push throttle hammers also available. Non-sparking CuBe needles (Ex308-319B) available. Model CSU-1BLNS Needle Scaler with Lever Throttle Model CSU-1BLCS Chisel Scaler with Lever Throttle Non-sparking CuBe needles (Ex308-319B) available. Accessories available: CSU-43: 7" Steel Needles EX308-319B: 7" CuBe Needles CSU-047: 3/4" Flat Chisel CSU-048: 1-3/8" Angle Chisel Ask About Non-sparking CuBe Chisels. Model No. Bore Stroke Rec'd Blows per Minute Hose Size Length Weight (lbs.) Scaling Hammer - Lever Throttle (takes 1/2" ir notched shank chisels) CSU-182LCS 15/16" 1-1/16" 4000 1/4" 9" 4 Needle Scaler - Lever Throttle (requires 19 needles; takes 1/2" ir notched shank chisels) CSU-182LNS 15/16" 1-1/16" 4000 1/4" 17" 5.75 Chisel Scaler - Lever Throttle (takes 1/2" c notched shank chisels) CSU-1BLCS 1" 4600 1/4" 10-1/4" 3.625 1-1/8" Needle Scaler - Lever Throttle (requires 19 needles; takes 1/2" c notched shank chisels) CSU-1BLNS 1" 4600 1/4" 17" 6.2 1-1/8" • 1-800-700-5919 • Air Inlet Thread CFM at 90 PSI 1/4" 13 1/4" 13 1/4" 6 1/4" PNEUMATIC CHISEL SCALERS / NEEDLE SCALERS Chisel Scalers / Needle Scalers 12 Visit our Web site at www.csunitec.com 63