Complete Portable Magnetic Drills
64Pages

Hole Cutting Twist Drilling Magnetic Drills Annular Cutters Hand-held Drills Drive Units Hammer Drills Beveling Machines

Portable Magnetic Drilling Machines PORTABLE MAGNETIC DRILLS Fast, accurate hole cutting… on the job site or in the shop! Made in Germany Powered by Designed for continuous operation, CS Unitec's portable magnetic drills are ideal for drilling structural steel and virtually any metal. We offer the most compact, powerful and reliable series of portable magnetic drills for holes up to 5-1/8" diameter. All CS Unitec drills are heavy-duty for use in construction and industry. Our complete line includes electric, pneumatic and hydraulic tools. They are available for prompt delivery. CS Unitec is...

The value is in the engineering… the payback is in the performance. for Active Safety Magnetic force is the key to safety and success. The magnetic force of your magnet depends on a number of factors:  æ Thickness of material being drilled æ Coatings or paint layers on material æ Chips, dirt or grease between the magnet and the material SafeMag System Electronic Safety Shutoff Sensor The SAFEMAG ™ System measures whether the magnet has sufficient adhesive force on the material. An LED indicator on the switch panel warns you of insufficient magnetic force (Red Light) or tells you if the...

Tool and Accessory Index Portable Magnetic Drills p. 8-31 MDM 40 p. 8 MAB 150 MACHINES AND ANNULAR CUTTERS ø 1-1/2" cutter capacity MAB 425 MAB 455 p. 12 p. 16 MAB 525 ø 2" cutter capacity ø 7/8" twist drill capacity ø 15/16" tapping capacity Reversible, 2-gear motor MAB 825 & 845 p. 14 ø 2" cutter capacity ø 7/8" twist drill capacity 2 speeds ø 1-3/8" cutter capacity ø 5/8" twist drill capacity MAB 485 p. 10 ø 1-1/2" cutter capacity For drilling in tight spaces p. 18 ø 2-1/2" cutter capacity ø 1" twist drill capacity ø 15/16" tapping capacity Reversible, 2-gear motor MAB 1300 p. 20 p. 22 ø...

Made in Germany Powered by Annular Cutters p. 32-39 p. 34-35 TiAlN ARMOR-PLATED Unibroach™ p. 36-37 High-speed steel 7/16" to 5-1/8" diameter 1", 2" and 3" depth Special sizes available TCT Hornet For higher working temperatures 7/16" to 5-1/8" diameter 1", 2" and 3" depth p. 38-39 Cobalt/Large-dia. Cutters Tungsten carbide-tipped 1/2" to 5-1/8" diameter 1", 2-3/8" and 3-3/8" depth p. 38 Cobalt Cutters Large-diameter Cutters Accessories p. 40-48 Lubricants Pilot Pins, Drill Chucks and Tapping Tools Arbors and Extensions Power Assist Countersinks, Drill/Taps and Chip Guard Drilling Starter...

Magnetic Drill Comparison Chart

MDM 40 PORTABLE MAGNETIC DRILLS Cutter capacity 1 1/2" dia. Made in Germany Powered by Heavy-duty compact hole drilling machine with internal cable routing Powerful • Reliable • 9.25 Amp doubleinsulated motor • Compact, 13" high • Lightweight, 24 lbs. All CS Unitec high-density dual-coil magnets are ground, not cast, and are wound into two circles to increase the surface area and density of the magnetic field. • Designed for continuous use • Intelligent electronic torque control Drill up to 1-1/2" dia. • Uses annular cutters • Integrated cutting oil reservoir • Automatic internal...

MDM 40 Specifications Made in Germany Powered by Cutter capacity 1 1/2" dia. PORTABLE MAGNETIC DRILLS 7" 13" 9.5" 6.5" 3.25" Model MDM 40 Model MDM 40 Specifications Motor Power 9.25 Amp / 110 Volt Weight 24 lbs. Hole Capacity 11/2" dia. Speed 440 RPM Magnet Base Size 61/2" L x 31/4" W Dimensions 13" H x 91/2" L x 7" W Magnetic Force (1" plate) 2640 lbs. Arbor Bore 3/4" Automatic Lubrication Included * 220 Volt / 50 Hz also available Standard Equipment 1 Magnetic drilling machine 1 Pilot pin 1 Steel shipping case† 1 Safety chain 1 Hexagon socket screw key SW 4 1 Operating manual Standard...

MAB 150 PORTABLE MAGNETIC DRILLS Cutter capacity 1 1/2" dia. Made in Germany Powered by Horizontal motor mount for drilling in tight spaces Internal cable routing protects the motor power cord from external damage Powerful • Reliable • 9.25 Amp doubleinsulated motor • Ultra compact, 7" high • Lightweight, 24 lbs. • Designed for continuous use • Intelligent electronic torque control Drill up to 1-1/2" dia.* • Uses annular cutters • Integrated cutting oil reservoir • Automatic internal lubrication Integrated Safety • Internal cable routing • Simple, ergonomic arrangement of controls for...

MAB 150 Specifications Made in Germany Powered by 12.87" 7.09" 7.44" 1.73" 1.30" 3.15" 6.30" Advancing lever can be mounted on either the left or right side of the MAB 150. Model MAB 150 Model MAB 150 Specifications Motor Power 9.25 Amp / 110 Volt Weight 24 lbs. Hole Capacity 11/2" dia. Speed 400 RPM Magnet Base Size 65/16" L x 33/16" W Dimensions 7" H x 127/8" L x 71/2" W Magnetic Force (1" plate) 2640 lbs. Arbor Bore 3/4" Automatic Lubrication PORTABLE MAGNETIC DRILLS Cutter capacity 1 1/2" dia. Included Model MAB 150 accepts cutters with 3/4" weldon shank. This unit has a maximum depth...

MAB 425 PORTABLE MAGNETIC DRILLS Cutter capacity 1 3/8" dia. Made in Germany Powered by High speed and two gears for cutting and twist drilling Internal cable routing protects the motor power cord from external damage Powerful • Reliable • 9.25 Amp doubleinsulated motor • 15-1/2" high, 29 lbs. • High-speed, 2-speed gearbox, ideal for annular cutters and twist drills • Designed for continuous use • Intelligent electronic torque control 71/2" stroke Drill up to 1-3/8" dia. • Uses annular cutters • Twist drilling up to 5/8" diameter with optional chuck (IBC 17) • Integrated cutting oil...