Chain Saws
8Pages

4 HP Pneumatic Chain Saw PNEUMATIC CHAIN SAWS Powerful, efficient cutting of wood and plastic Used successfully for many years in polyethylene plants, petrochemical industries, utilities, underground mines and marine applications • Pneumatic power is safer than gas or electric in hazardous atmospheres and wet environments, including underwater applications • Low maintenance and easy Model 5 1007 0040 startup – saw chain and motor are 25" cutting capacity automatically oiled by two separate lubricating systems • Powerful 4 HP motor at 90 PSI air pressure, 92 CFM • Chain guard to protect operator • Available with 15", 17", 21" and 25" cutting capacity • .404 pitch Super Chisel saw chain is standard • Carbide-tipped and Ripping saw chain are optional Series 5 1008: Underwater chain saw with exhaust valve Air Tool Line Conditioner for underwater air tools to displace moisture. Developed to inhibit rust and corrosion of air motors. 1 quart/liter, order part number MS 9105. Model No. PSI CFM 15" 17" 21" 25" 90 90 90 90 92 92 92 92 29" 33" 37" 41" 22 25 28 31 3/4" NPT (ID) 3/4" NPT (ID) 3/4" NPT (ID) 3/4" NPT (ID) 5/8" 21" 25" For General Use 5 1007 0003 4 HP 5 1007 0010 4 HP 5 1007 0020 4 HP 5 1007 0040 4 HP For Underwater Use* 5 1008 0030 4 HP 5 1008 0040 4 HP Length Weight with Bar (lbs.) Air Connection Cutting Capacity Power 90 90 92 92 37" 41" 29 31 3/4" 5/8" NPT (ID) 3/4" NPT (ID) Hose ID 5/8" 5/8" 5/8" 5/8" * Pneumatic Chain Saw with 17" cutting capacity is also available for underwater applications. Carbide-tipped Saw Chain • More cutting efficiency with less down time – stays sharp 25x longer and lasts 10x longer than regular-life saw chains • Efficiently cuts tough materials, including plastics, railroad ties, utility poles, hardwoods and soft masonry materials • Withstands severe cutting conditions that include sand, mud, salvage work, etc. • Easily resharpened • Available in 10", 15", 17", 21" and 25" lengths 24 • 1-800-700-5919 • Close-up of Carbide-tipped Chain Also available: Super Chisel and Ripping saw chain in 10", 15", 17", 21" and 25" lengths Guide Bars for wood and plastics also available. Contact CS Unitec for more information. Visit our Web site at www.csunitec.com

• Pneumatic power is safer than gas or electric in ATEX Classified hazardous atmospheres and wet environments, including underwater applications • Low maintenance and easy startup – saw chain and motor are automatically oiled by two separate lubricating systems • Powerful 4 HP motor at 90 PSI air pressure, 92 CFM • Chain brake for stopping chain movement during kickback or repositioning of saw during cutting • 5 1027 series plastic-cutting chain saws Series 5 1026, 5 1027, 5 1028 and 5 1029 come with integrated water feed Pneumatic chain saw with brake. • .404 pitch Super Chisel saw...

Hydraulic Chain Saws HYDRAULIC CHAIN SAWS Versatile, lightweight saw for utility and maintenance Model ACH000 Pistol Grip Saw (above/right) • Up to 6 HP, high-torque gear motor • Open/closed hydraulic system • Pistol grip with safety trigger lock and insulated handle • Patented spool system eliminates heat generation, for safer operation • Ideal for use in utilities, mines, construction and agriculture • Pole saw models ACS-70 and ACS-80 feature non-conductive fiberglass pole for long reach (overall lengths: ACS-70 - 6.5'; ACS-80 - 7.5') • Models ACS-70 and ACS-80 approved for live line...

PowerGrit Air Utility Saw Cut ductile iron pipe underground with minimal excavation The PowerGrit system allows the user to perform the entire cut from one position - a feature especially helpful in reducing the amount of excavation required in underground cuts. PNEUMATIC UTILITY SAW • Ideal for utility, commercial infrastructure, fire & rescue, construction and underwater applications • Cut ductile iron (D. I.) pipe • Patent-pending chain design with brazed layer diamond coating • 15" and 20" bar length available • Single side access to pipe • Reduced excavation, labor time and operator...

Concrete Chain Saws Pneumatic • Hydraulic CONCRETE CHAIN SAWS Cut through walls, floors and columns in a single pass AirFORCE F4 ™ Diamond Chains Optimized for pneumatic and hydraulic chainsawing Model CS 536163-2 6.5 HP Air Motor • Specifically designed for the demanding requirements of professional sawing and drilling contractors • Now with AirFORCE F4™ Diamond chain – optimized for use with CS Unitec concrete chain saws • Deep plunge cuts – up to 20" deep • Square corners up to 19" with no overcuts • Cut mechanical openings and irregular shapes • Easily cut through reinforced concrete,...

Concrete Chain Saws Model CS 526822 11 HP Hydraulic Motor AirFORCE F4 ™ Diamond Chains Optimized for pneumatic and hydraulic chainsawing CONCRETE CHAIN SAWS Rugged construction for demanding applications Above: Optional SpeedHook ® guides saw for straight cutting (see page 30). Model No. Power No Load Speed Max. Depth of Cut Motor Specifications Weight w/ Bar and Chain No Load Torque (in.-lbs.) Noise Level at 3 ft. 10" 15" 20" 124 CFM @ 90 PSI (6 bar) 124 CFM @ 90 PSI (6 bar) 124 CFM @ 90 PSI (6 bar) 32 33 34 104 104 104 88 dB 88 dB 88 dB 10" 15" 20" 8 GPM @ 2500 PSI (172 bar) 8 GPM @ 2500...

Concrete Chain Saw Accessories Make your concrete chain saw work for you CONCRETE CHAIN SAW ACCESSORIES AirFORCE F4 ™ Diamond Chains Two options for cutting Match the Diamond Chain to the material or application: Premium 1. AirFORCE concrete For cutting 2. AirFORCE Standard General-purpose with steel reinforcement 10" – Part No. CC 01-2540 15" – Part No. CC 01-3810 20" – Part No. CC 05-5080 10" chain has 25 segments for 10" max. cutting depth, 9" square corners Diamond Chain 10" – Part No. CC 02-2540 15" – Part No. CC 02-3810 20" – Part No. CC 03-5080 15" chain has 29 segments for 15" max....