Model EV-2 and EV-2L Micro Sandblasters
1Pages

Model EV-2 and EV-2L Micro Sandblasters The SWAM-BLAST® Micro Sandblasters introduce a prcise amount of finely graded abrasive pow-der into a controlled stream of compressed air through the abrasive/air pathway and out a manually or automatically positioned nozzle tip. The Model EV-2 and EV-2L are designed with independently adjustable powder flow control and air pressure regulation for total process control. When detail is required, the powder flow is turned down to reduce the amount of the powder being vibrated into the abrasive/air pathway thus allowing the use of very small nozzle tips. For more aggressive requirements, the air pressure, powder flow and the nozzle tip diameter can be in-creased. An assortment of nozzle styles and sizes, a wide variety of powder types and particle sizes, and interchangeable orifice plates are available to accomplish various applications. The Model EV-2 works very well with a noz-zle range from .007" up to .040". For more aggressive applications that require a larger nozzle range, the Model EV-2L is suitable for nozzle sizes .018" up to .060". With the use of aggressive abrasive powders, a carbide lined fitting kit is available for the Model EV-2 to replace the brass fittings throughout the abrasive/air pathway. CIMTSTAL MARK, INC. offers additional options for the Model EV-2 and EV-2L as well as work chambers, dust collectors and air dryers in various configurations to meet your specific require-ments. Power Requirement 115 VAC, 60 Hz, 1 amp Air Requirement 40 psi (276 kPa) minimum 140 psi (956 kPa) maximum 5 sfcm maximum Weight 43 pounds (20 kg) Size 13"Wx11"D x 13"H Shipping Weight: Shipping Size: 58 pounds (26.4kg) 24"Wx15"Dx15"H Model EV-2 Part Number 6046-1 Model EV-2L Part Number 6047-1 Represented by CRYTSTAL MARK, INC. A SWAN TECHNOLOGIES CORPORATION 613 Justin Avenue Glendale, California 91201-2396 (818)240-7520 (800)659-7926 镕 FAX (818)247-3574 www.crystalmarkinc.comsales@crystalmarkinc.com ©2008 Crystal Mark, Inc. ALL RIGHTS RESERVED. SWAM and SWAM BLAST are registered trademarks of Crystal Mark, Inc. EV-2 EV-2L_2008