Catalog excerpts
Features and Benefits • No Electrical Connection Necessary • Color change of the Desiccant Provides an Instant Status of the Compressed Air System For replacement Desiccant Silica Gel P/N 7449-1 call CRYSTAL MARK, INC Dimensions _Zinc Polycarbonate Aluminum Fluorocarbon Desiccant Dryer 7448-1 Specifications Atmospheric Dew Point*--45°F (-43°C) Maximum Continuous Air Flow* 10 SCFM (4.7 dm3/s) Maximum Pressure 150 PSIG (10.3 bar) Port Size -NPT / BSPP-G1/4 Total Air Flow* 1/4 11,000 SCFM (311 m3) Total Minutes of Operation @ Continuous Air Flow Weight (with Desiccant) lb. (kg) - 7.4 (3.4 Weight Desiccant Alone lb. (kg) - 1.8 (0.8) * With dry desiccant at 100 PSIG (7 bar) and 70°F 21°C), saturated inlet (100% RH). Bowls Plastic Bowl Guard Seals
Open the catalog to page 1
1. GENERAL INSTRUCTIONS 1.1. Warning Labels: • Warning labels should not be removed, painted over or otherwise obscured. 2.1. Pressure Rating: Never exceed the rated pressure of a product. Consult product labeling, Pneumatic Division catalogs or the instruction sheets supplied for maximum pressure ratings. 2.2. Temperature Rating: Never exceed the temperature rating of a product. Excessive heat can shorten the life expectancy of a product and result in complete product failure. 2.3. Lubrication and Compressor Carryover: Some modern synthetic oils can and will attack nitrile seals. If there...
Open the catalog to page 2All Crystal Mark catalogs and technical brochures
-
Basic Equipment1 Pages
-
Air Filter Dryers1 Pages
-
The Point Ionizer System1 Pages
-
Turbo Max2 Pages
-
Conformal Coating Removal1 Pages
-
The SWAM® Complete Work Cell2 Pages
-
SWAM® Wire Abrading System1 Pages
-
The Eco Blaster1 Pages
-
Dust Collector Model 64 & 741 Pages
-
TURBO-station and TURBO-cab1 Pages
-
Dust Collector Model DC1001 Pages
-
SWAM-BLAST® All1 Pages
