Conformal Coating Removal Work Cell

Product catalog summary

Overview: The document describes the SWAM-Blaster® Model MV-2L, a micro sandblast system designed for the selective removal of conformal coatings from components such as printed circuit boards. The system is environmentally friendly, using no solvents, and is mounted on casters for easy installation and reconfiguration.

Components: The system includes the SWAM-Blaster® Model MV-2L, an Ionized Ergonomic Work Chamber, a Point Ionizer™ at the nozzle, and a Dust Collector. Optional components include a Zoom Microscope & Mount and an ESD Field Meter System.

Specifications: The system operates at 115V/60Hz, with a 1 horsepower blower motor. The chamber interior measures 24” wide, 17” high, and 19” deep, with a tempered glass window. It has an air flow of 400 cfm, a 55 sq. ft. cotton sateen filter, and a built-in silencer with a 67db sound level. The air requirement is 10 SCFM at a maximum of 140 psi and a minimum of 40 psi. Other power options include 100V/50Hz, 110V/60Hz, 230V/50Hz, and 230V/60Hz.

Functionality: The MV-2L is designed to remove conformal coatings from pinpoint areas to entire surfaces. It features a unique tilt powder tank design for quick changes between abrasive powders, independently adjustable powder flow control, and air pressure regulation. The system includes large carbide-lined components for extended wear life and optimal powder volume.

ESD Protection: The Point Ionizer™ reduces Electro-Static Discharge (ESD) to prevent potential damage to sensitive components during the removal process.

Abrasive Powders: Various abrasive powders are available, including Carbo Blast™, Soda Bicarbonate, and Plastic Blast. Carbo Blast™ is the softest and suitable for most conformal coatings, while Soda Bicarbonate is more aggressive and water-soluble. Plastic Blast is harder and can remove many conformal coatings.

Additional Components: Crystal Mark, Inc. offers additional components such as standard and ionized work chambers, black light bulbs for UV detection, dust collectors, and electrostatic field meters for periodic ESD metering.

Catalog excerpts

The SWAM-Blaster® Conformal Coating Removal Work Cell Environmentally Friendly No Solvents! Consisting of: . SWAM-Blaster® Model MV-2L • Ionized Ergonomic Work Chamber • Point Ionizer™ at Nozzle • Dust Collector All in one and mounted on casters for easy installation and work cell re-configuration. Optional: Microscope and Mount for close work Opt°nah ESD Field Meter f°r testing system CRYSTAL MARK, INC. A SWAN TECHNOLOGIES CORPORATION 613 Justin Avenue Glendale, California 91201-2396 (818)240-7520 • (800)659-7926 • FAX (818)247-3574 www.crystalmarkinc.com • [email protected] ©2008 Crystal Mark, Inc. ALL RIGHTS RESERVED. SWAM and SWAM BLAST are registered trademarks of Crystal Mark, Inc. CCR-CWC—MV2L June-2012

Open the catalog to page 1

Environmentally Friendly Conformal Coating Removal No Solvents! CRYSTAL MARK, INC. manufactures that will safely and selectively remove most types of conformal coatings from various components including printed circuit boards without causing mechanical or ESD damage. The SWAM-BLAST® Model MV-2L Micro Sandblaster was specifically designed to selectively remove conformal coatings from pinpoint areas to an entire surface. With the unique tilt powder tank design, the Model MV-2L offers flexibility to quickly change from one abrasive powder to another for the various types of conformal coatings available....

Open the catalog to page 2

Conformal Coating Removal Work Cell

Conformal Coating Removal Work Cell

Catalog excerpts

All Crystal Mark catalogs and technical brochures