1. Catalogs
  2. CRYSOUND
  3. CRY8125 Ex Acoustic Imaging Camera

CRY8125 Ex Acoustic Imaging Camera
1 /2Pages

CRY8125 Ex Acoustic Imaging Camera

CRY8125 Ex Acoustic Imaging Camera
1 /2Pages

Catalog excerpts

CRY8125 Ex Acoustic Imaging Camera-1

CRY8125 Ex Acoustic Imaging Camera Industry's First TUV-Certified Intrinsic Acoustic Imaging Camera CRYSOUND introduces the new CRY8125 Ex Acoustic Imaging Camera, certified by TUV and compliant with standards for use in explosive atmospheres. With its advanced capabilities, the CRY8125 redefines industrial inspection by precisely locating leaks, identifying partial electrical discharges, and detecting mechanical wear. The CRY8125 is fully certified under lECEx and ATEX, and compliant with IEC 60079-0 and IEC 60079-11, ensuring safe operation in explosive atmospheres. The integrated workflow of the CRY8125 - from image capture and analysis to report generation - significantly improves the efficiency of gas leak detection, ensuring safer and more reliable daily operations. • Leak detection in explosive gas and dust atmospheres (Zone 2) • Real-time far-field sound source localization and visualization • Leak detection and leak rate measurement for all compressed (non-volatile) gases • Partial discharge detection and type recognition for insulators and switchgears • Mechanical inspection for predictive maintenance of bearings and conveyors • Report generation The CRY8125 is TUV-certified under lECEx and ATEX and meets IEC 60079-11 and 60079-0 standards. It can be used for gas leak detection in the explosive gas and dust atmospheres. • Endure 28-Day Extreme Reliability Testing for the Most Robust Protection The CRY8125 undergoes 28 days of 90% humidity, 90°C high-temp and -25°C low-temp aging, immediately followed by drop testing. After all these extreme testing, it still maintains an IP54 rating to ensure no ingress of gas or dust. • Detection Any Type of Gas in Explosive Atmospheres The CRY8125 can detect any type of gas leaks - such as natural gas, hydrogen and CO - in explosive atmospheres. It also quantifies leak rates and estimates economic losses in real time, enabling fast analysis and maintenance decision-making. • Comprehensive Hardware Configuration Bluetooth and Wi-Fi enable direct data transmission to local devices. Up to 4 IEPE sensors (accelerometers, microphones, etc.) can be added to the system, enabling complex detection scenarios and allowing for future expansion. • 8 Inch, 2M Pixel Display for Clear Insights into Problems The CRY8125 display features 2K resolution, 6x digital zoom, and 600 nits display brightness for accurate viewing of field conditions in full sunlight. The CRY8125 is covered by a 2-year limited warranty.

 Open the catalog to page 1
CRY8125 Ex Acoustic Imaging Camera-2

General Specifications 0CRYSOUNDTechnical SpecificationsAcoustic Specifications Microphone array 200 MEMS microphones Minimum detectable leak 10 m: 0.0029 L/min, 2.7 bar Camera pixels 13M pixels Focal length 4.3 mm (0.17 inches) Operating temp. Storage temp. Storage size Battery type Battery capacity Battery life Display Resolution 1920 x 1200 (6x digital zoom) Touch screen 8 inches, capacitive touch screen Brightness 600 nits, auto adjustment USB-C 1 USB 3.0 for charging, HDMI, data USB-C 2 USB 2.0, USB-C sensor 3.5 mm audio jack Headphone output MicroSD card slot External storage Analog input...

 Open the catalog to page 2

All CRYSOUND catalogs and technical brochures

  1. CRY721

    2  Pages

  2. CRY720

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.