*mydirectindustry

Catalogs
CRYSOUND
CRY510 Preamplifier

CRY510 Preamplifier

Product catalog summary

Introduction
The CRY510 IEPE preamplifier is designed to work with 1/2 inch measurement microphones, including those from B&K and G.R.A.S. It is used to transform impedance and amplify acoustic signals, featuring high input impedance, low output impedance, low noise, and a wide frequency response range. It is suitable for electroacoustic test systems and multi-noise analysis.

Specifications

Frequency Response: 20Hz to 50kHz (±0.2 dB), 10Hz to 100kHz (±0.5 dB)
Input Impedance: Greater than 10GΩ/0.5pF
Output Impedance: Less than 20Ω
Distortion (THD): Less than 0.1%
Max. Output Voltage: Greater than 5.0 Vrms (with +24V power supply)
Power Supply: IEPE (2mA to 10mA)
Nominal Operating Current: 4mA
Noise (A-weighting): Less than 3 μVrms
Noise, linearity (20 to 20KHz): Less than 10 μVrms
Gain: -0.3 dB
Connector Type: SMB
Operating Temperature: -30℃ to +70℃
Thread Fitting Port: 11.7mm x 60UNS (M11.7 x 0.423mm)
Dimensions: Diameter 12.7mm (1/2 inch), Length 31.5mm

Catalog excerpts

CRY510 IEPE Preamplifier Introduction CRY510 measurement microphone to transform the impedance and amplifier the acoustic signal. It also compatible with other 1/2 inch measurement microphones characteristic of high input impedance, low output impedance, lower noise, wide frequency response range, etc. It can be used for the condition of electroacoustic test system or multi-noise analysis. Parameters CRY510 IEPE Preamplifier Frequency Response Input Impedance Output Impedance Power Supply Nominal Operating Current Connector Type Thread fitting port Add: No.31-1, Xianxing Road, Xianlin Industrial Park, Yuhang District, Hangzhou, Zhejiang

Open the catalog to page 1

CRY510 Preamplifier

CRY510 Preamplifier

Catalog excerpts

All CRYSOUND catalogs and technical brochures