*mydirectindustry

MOPA532-700mW

Product catalog summary

Product Overview: The MOPA 532-700mW is a diode-pumped, passively Q-switched solid-state laser designed for applications in biology, biomedicine, chemistry, and analytics. It operates at a wavelength of 532 nm and offers single pulse operation with a pulse width of less than 1.2 ns.

Specifications:

Optical Data: The laser provides an average power of over 700 mW at 15 kHz, with a pulse energy greater than 50 µJ. It features a beam divergence of less than 3.0 mrad and a beam ellipticity of less than 2:1. The beam diameter at the laser exit is 0.6 ± 0.3 mm, and it operates in the TEM00 spatial mode.
Pulse Repetition Rate: The laser supports a pulse repetition rate from 1 Hz to 20 kHz with an external trigger.
Stability: Pulse energy drift is less than ± 3% at 15 kHz, and pulse-to-pulse energy stability is less than 10% rms.
Electrical Data: The laser consumes less than 250 W of electrical power and operates on a line voltage of 100 - 250 V AC. It includes a USB interface and connectors for external triggering and DC output.
Miscellaneous: The warm-up time is under 10 minutes, and the operating temperature range is 18 - 38 °C. The laser head dimensions are 61 x 150 x 330 mm, and the stand-alone unit measures 184 x 449 x 375 mm.

Options: Available options include an external telescope or multimode fiber coupling, manual or electrical attenuator, synchronization signal output, and an electrical or manual wavelength switch between 532 nm and 1064 nm.

Safety and Compliance: The MOPA 532-700mW laser is classified as a Class 4 / IV laser according to IEC 60825-1:2014 standards.

Note: Product specifications are subject to change without notice.

Catalog excerpts

Crystal Laser Systems _________________________________________________ MOPA 532-700mW Diode pumped passively Q-switched solid state laser 532 nm Single Pulse < 1.2 ns 1 – 20 kHz > 700 mW External / Internal Trigger Mode biology · biomedicine · chemistry · analytics Optical Data Average Power Pulse Energy Beam Divergence (full angle) Beam Ellipticity Beam Diameter Spatial Mode Pulse Repetition Rate (with external trigger) Pulse Width (FWHM) Polarization Ratio Pulse Energy Drift Pulse-to-Pulse Energy Stability Laser Classification Optical Output Electrical Data Free Beam Electrical Power Consumption Line Voltage BNC connector for external triggering (TTL) SMB connector for 24 V DC output Warm-up Time Operating Temperature Laser Head Size Stand Alone Unit Size External telescope (beam expander) or multimode fiber coupling Manual or electrical attenuator Synchronization signal output (rise time < 2 ns) Electrical or manual wavelength switch 532nm – 1064nm) or electrical beam blocker 1) Drift over 8 hours, energy averaged over 10 sec after 5 min of continuous operation, temperature variation ± 3 °C and < 3 °C/hour, with activated closed loop control for the pulse energy RMS over 1000 pulses after 5 min of continuous operation.

Open the catalog to page 1

Crystal Laser Systems _________________________________________________ Laser Head and Controller Laser Head (height = 61; width = 150; length = 255 core dimensions in mm ) Stand Alone Unit (height = 184, width = 449; length = 375 core dimensions in mm ) Laser Safety Labels The MOPA 532-700mW lasers are class 4 / IV according to IEC 60825-1:2014 © April 2022, Rev 3.0, CryLaS GmbH. All rights reserved. Product specifications are subject to change without notice.

Open the catalog to page 2

MOPA532-700mW

MOPA532-700mW

Catalog excerpts

All CryLaS Crystal Laser Systems GmbH catalogs and technical brochures