Crystal Laser Systems _________________________________________________ MOPA 355-500mW Diode pumped passively Q-switched solid state laser 355 nm Single Pulse < 1.2 ns 1 – 20 kHz > 500 mW External / Internal Trigger Mode biology · biomedicine · chemistry · analytics Optical Data Average Power Pulse Energy Beam Divergence (full angle) Beam Ellipticity Beam Diameter Spatial Mode Pulse Repetition Rate (with external trigger) Pulse Width (FWHM) Polarization Ratio Pulse Energy Drift Pulse-to-Pulse Energy Stability Laser Classification Optical Output Electrical Data Free Beam Electrical Power Consumption Line Voltage BNC connector for external triggering (TTL) SMB connector for 24 V DC output Warm-up Time Operating Temperature Laser Head Size Stand Alone Unit Size (core size) External telescope (beam expander) or multimode fiber coupling Manual or electrical attenuator Synchronization signal output (rise time < 2 ns) Electrical or manual wavelength switch (355nm – 532nm) or electrical beam blocker 1) Drift over 8 hours, energy averaged over 10 sec after 5 min of continuous operation, temperature variation ± 3 °C and < 3 °C/hour, with activated closed loop control for the pulse energy RMS over 1000 pulses after 5 min of continuous operation.

Crystal Laser Systems _________________________________________________ Laser Head and Controller Laser Head (height = 61; width = 150; length = 255 core dimensions in mm ) Stand Alone Unit (height = 184, width = 449; length = 375 core dimensions in mm ) Laser Safety Labels The MOPA 355-500mW lasers are class 4 / IV according to IEC 60825-1:2014 © April 2022, Rev 3.0, CryLaS GmbH. All rights reserved. Product specifications are subject to change without notice.