Crystal Laser Systems _________________________________________________ MOPA 355-200 Diode pumped passively Q-switched solid state laser 355 nm Single Pulse ≤ 1.4 ns 1 – 1000 Hz > 200 µJ External / Internal Trigger Mode biology · biomedicine · chemistry · analytics Optical Data Peak Power Pulse Energy Beam Divergence (full angle) Main Axis Divergence Ratio Beam Diameter Spatial Mode Pulse Repetition Rate (with external trigger) Pulse Width (FWHM) Polarization Ratio Pulse Energy Drift Pulse-to-Pulse Energy Stability Laser Classification Optical Output Electrical Data Free Beam Electrical Power Consumption Line Voltage BNC connector for external triggering (TTL) SMB connector for 24 V DC output Warm-up Time Operating Temperature Laser Head Size Stand Alone Unit Size (core size) External telescope (beam expander) or multimode fiber coupling Manual or electrical attenuator Synchronization signal output (rise time < 2 ns) Manual or electrical wavelength switch (355nm – 532nm) or electrical beam blocker 1) Drift over 8 hours, energy averaged over 10 sec after 5 min of continuous operation, temperature variation ± 3 °C and < 3 °C/hour, with activated closed loop control for the pulse energy RMS over 1000 pulses after 5 min of continuous operation.

Crystal Laser Systems _________________________________________________ Laser Head and Controller Laser Head (height = 61; width = 150; length = 255 core dimensions in mm ) Stand Alone Unit (height = 184, width = 449; length = 375 core dimensions in mm ) Laser Safety Labels The MOPA 355-200 lasers are class 4 / IV according to IEC 60825-1:2014 © Jan. 2023, Rev 2.2, CryLaS GmbH. All rights reserved. Product specifications are subject to change without notice.