*mydirectindustry

MOPA1064-2000mW

Product catalog summary

Product Overview: The MOPA 1064-2000mW is a diode-pumped, passively Q-switched solid-state laser designed for applications in biology, biomedicine, chemistry, and analytics. It operates at a wavelength of 1064 nm and offers single pulse operation with a pulse width of less than 1.6 ns.

Specifications:

Optical Data: The laser provides an average power of over 2000 mW at 15 kHz, with a pulse energy greater than 140 µJ at the same frequency. The beam divergence is less than 6.0 mrad, and the beam ellipticity is less than 2:1. The beam diameter at the laser exit is 0.7 ± 0.3 mm, and it operates in a TEM00 spatial mode.
Pulse Repetition Rate: The laser supports a pulse repetition rate from 1 Hz to 20 kHz with an external trigger.
Stability: Pulse energy drift is less than ±3% at 15 kHz, and pulse-to-pulse energy stability is less than 10% rms at the same frequency.
Laser Classification: It is classified as a Class 4 / IV laser according to IEC 60825-1:2014.

Electrical Data: The laser consumes less than 250 W of electrical power and operates on a line voltage of 100 - 240 V AC (50-60 Hz). It includes a USB interface, a BNC connector for external triggering (TTL), and an SMB connector for 24 V DC output.

Miscellaneous: The laser has a warm-up time of less than 10 minutes and operates within a temperature range of 18 - 38 °C. The laser head dimensions are 61 x 150 x 330 mm, and the stand-alone unit dimensions are 184 x 449 x 375 mm.

Options: Available options include an external telescope (beam expander) or multimode fiber coupling, a manual or electrical attenuator, synchronization signal output with a rise time of less than 2 ns, and an electrical beam blocker.

Notes: The product specifications are subject to change without notice, and the laser safety labels indicate it is a Class 4 / IV laser.

Catalog excerpts

Crystal Laser Systems _________________________________________________ MOPA 1064-2000mW Diode pumped passively Q-switched solid state laser 1064 nm Single Pulse < 1.6 ns 1 – 20 kHz > 2000 mW External / Internal Trigger Mode biology · biomedicine · chemistry · analytics Optical Data Average Power Pulse Energy Beam Divergence (full angle) Beam Ellipticity Beam Diameter Spatial Mode Pulse Repetition Rate (with external trigger) Pulse Width (FWHM) Polarization Ratio Pulse Energy Drift Pulse-to-Pulse Energy Stability Laser Classification Optical Output Electrical Data Free Beam Electrical Power Consumption Line Voltage BNC connector for external triggering (TTL) SMB connector for 24 V DC output Warm-up Time Operating Temperature Laser Head Size Stand Alone Unit Size External telescope (beam expander) or multimode fiber coupling Manual or electrical attenuator Synchronization signal output (rise time < 2 ns) Electrical beam blocker 1) Drift over 8 hours, energy averaged over 10 sec after 5 min of continuous operation, temperature variation ± 3 °C and < 3 °C/hour, with activated closed loop control for the pulse energy RMS over 1000 pulses after 5 min of continuous operation.

Open the catalog to page 1

Crystal Laser Systems _________________________________________________ Laser Head and Controller Laser Head (height = 61; width = 150; length = 255 core dimensions in mm ) Stand Alone Unit (height = 184, width = 449; length = 375 core dimensions in mm ) Laser Safety Labels The MOPA 1064-2000mW lasers are class 4 / IV according to IEC 60825-1:2014 © April 2022, Rev 3.0, CryLaS GmbH. All rights reserved. Product specifications are subject to change without notice.

Open the catalog to page 2

MOPA1064-2000mW

MOPA1064-2000mW

Catalog excerpts

All CryLaS Crystal Laser Systems GmbH catalogs and technical brochures