Crystal Laser Systems _________________________________________________ FQSS 266-200 Diode pumped passively Q-switched solid state laser biology · biomedicine · chemistry · analytics Optical Data Beam Divergence (full angle) Beam Ellipticity Beam Diameter < 1.5 : 1 500 ± 150 µm (located at about 110mm inside the laser head) 800 ± 300 µm (at laser exit) Peak Power Pulse Energy Waist Diameter Pulse Repetition Rate (with external trigger) 1 - 60 Hz Pulse Width (FWHM) Polarization Ratio Long term pulse energy stability (6 hours) Pulse-To-Pulse Stability Laser Classification Residual Emission Optical Output Electrical Data Interface Miscellaneous Options Free Beam Electrical Power Consumption Line Voltage Operating Temperature Laser Head Size Synchronization signal output (rise time < 2 ns) Manual shutter or electrical beam blocker Manual or electrical driven wavelength switch 266 nm / 532 nm External telescope (e.g. M=5) Manual or electrical attenuator 1) 2) Drift over 6 hours, energy averaged over 10 sec after 5 min of continuous operation, temperature variation < 3 °C/hour. RMS over 1000 pulses after 5 min of continuous operation.

Crystal Laser Systems _________________________________________________ Laser Head and Controller Laser Safety Labels The FQSS266-200 lasers are class 4 / IV according to IEC 60825-1:2014 © Dec. 2018, Rev 1.5, CryLaS GmbH. All rights reserved. Product specifications are subject to change without notice.