*mydirectindustry

FQSS213-Q

Product catalog summary

Product Overview: The eMOPA 213-20 is a diode-pumped, passively Q-switched solid-state laser designed for applications in biology, biomedicine, chemistry, and analytics. It operates at a wavelength of 213 nm and is capable of single pulse operation with a pulse width of less than 1.0 ns.

Key Specifications:

Wavelength: 213 nm
Peak Power: Greater than 20 kW at 1000 Hz
Pulse Energy: Greater than 20 µJ at 1000 Hz
Beam Divergence: Less than 1.5 mrad
Beam Ellipticity: Less than 3:1
Beam Diameter: 0.6 ± 0.3 mm at laser exit
Spatial Mode: TEM00
Pulse Repetition Rate: Single shot to 1 kHz
Polarization Ratio: Greater than 100:1, horizontal
Pulse Energy Drift: Less than ± 5% over 6 hours
Pulse-to-Pulse Energy Stability: Less than 3% over 1000 pulses
Laser Classification: Class 4 / IV

Electrical and Interface Details:

Power Consumption: Less than 100 W
Line Voltage: 90 - 265 V AC (50-60 Hz)
Interface: USB / RS232 with BNC connector for external triggering (TTL) and SMB connector for 24 V DC output

Physical and Environmental Specifications:

Warm-up Time: Less than 10 minutes
Operating Temperature: 22 - 32 °C
Laser Head Size: 56 x 140 x 265 mm
Stand-Alone Unit Size: 129.5 x 177 x 180 mm

Options and Accessories: Includes an electrical beam blocker and synchronization signal output with a rise time of less than 1.5 ns.

Safety and Compliance: The laser is classified as Class 4 according to IEC 60825-1 standards, indicating a high level of hazard potential.

Catalog excerpts

Crystal Laser Systems _________________________________________________ eMOPA 213-20 Diode pumped passively Q-switched solid state laser 213 nm Single Pulse < 1.0 ns single shot (pulse on demand) – 1 kHz • > 20 μJ • External / Internal Trigger biology · biomedicine · chemistry · analytics Optical Data Peak Power Pulse Energy Beam Divergence (full angle) Beam Ellipticity Beam Diameter Spatial Mode Pulse Repetition Rate (with external trigger) single shot (pulse on demand) – 1 kHz Pulse Width (FWHM) Polarization Ratio Pulse Energy Drift over 6h Optical Output Electrical Data Pulse-to-Pulse Energy Stability 2) Laser Classification Free Beam Electrical Power Consumption Line Voltage USB / RS232 BNC connector for external triggering (TTL) SMB connector for 24 V DC output Warm-up Time Operating Temperature Laser Head Size Stand-Alone Unit Size Electrical beam blocker Synchronization signal output (rise time < 1.5 ns) Averaged over 10s after 10min of contiunous operation @ 1kHz Over 1000 pulses @ 1kHz after 10min of continuous operation

Open the catalog to page 1

Crystal Laser Systems _________________________________________________ Dimensions Laser Head: Controller Stand-Alone: Laser Safety Labels The eMOPA 213-20 lasers are class 4 according to IEC 60825-1 © Apr. 2023, Rev 1.5, CryLaS GmbH. All rights reserved. Product specifications are subject to change without notice Rev. 1.5 Page 2 of 2 CryLaS GmbH · Ostendstraße 25 · D-12459 Berlin · Fon +49(0)30 - 5304 2400 · Fax +49(0)30 - 5304 2444 · [email protected] · www.cryl

Open the catalog to page 2

FQSS213-Q

FQSS213-Q

Catalog excerpts

All CryLaS Crystal Laser Systems GmbH catalogs and technical brochures