FQCW266-500
1 /2Pages

FQCW266-500

FQCW266-500
1 /2Pages

Catalog excerpts

FQCW266-500-1

Crystal Laser Systems _________________________________________________ FQCW 266-500 Diode Pumped Continuous Wave Solid State Laser 266 nm Continuous Wave Single Frequency Low Intensity Noise M² < 1.3, TEM00 Up to 500 mW Air Cooled Patented Design (*) lithography · inspection · spectroscopy · analytics Optical Data Wavelength Output Power (Adjustability) Linewidth Beam Propagation Factor M² (average) Beam Propagation Factor M²x (horizontal) Beam Propagation Factor M²y (vertical) Polarisation orientation and purity Beam Diameter Beam Divergence Static Alignment Tolerance lateral ± 0.25 mm, angular ± 2.5 mrad Spot-to-Spot Beam Pointing Variation Power Stability (0.5 Hz over 8 h) Life Time Crystal Spot Life Time Total Life Time (before first service) Electrical Data Power Consumption Mean (Max) Line Voltage Communication Interfaces Safety Features Required Options Warm-up Time Operating Temperature (laser head) < 200 W (450 W) 90 - 250 V AC (50-60 Hz) USB / RS232 / Ethernet key switch, interlock, electrical shutter < 45 min 20 - 25 °C non-condensing Laser Head Dimensions Control Unit Dimensions Laser Head Weight Control Unit Weight Purge Interface for Laser Head Notes General requirement: 30 minutes warm-up in the temperature range 20 - 25 °C, temperature change < 1 K/h. 1. Referenced to kinematic mounting base 2. Position and angle of static alignment tolerances are specified with regard to laser beam exit. (*) Protected by patents: DE10339210B4, EP1344105B1, US7027209B2, DE102010064382B4, US9429814B2, DE102012212428B4, US9024247

 Open the catalog to page 1
FQCW266-500-2

Crystal Laser Systems _________________________________________________ Dimensions Laser Head: Control Unit: Laser Safety Labels FQCW266 laser sources are class 4 / IV lasers according to IEC 60825-1 Model: Wavelength: Max. Output Power: Laser Class: Complies with IEC 60825-1:2014 Complies with 21CFR 1040.10 and 1040.11 except for deviations pursuent to Laser Notice No. 50, dated July 26, 2001. © Mar. 2023, Rev 5, CryLaS GmbH. All rights reserved. Product specifications are subject to change without notice CryLaS GmbH · Ostendstraße 25 · D-12459 Berlin · Fon +49(0)30 - 5304 2400 · Fax +49(0)30...

 Open the catalog to page 2

All CryLaS Crystal Laser Systems GmbH catalogs and technical brochures

  1. MOPA355-500mW

    2  Pages

  2. MOPA266-50

    2  Pages

  3. MOPA532-700mW

    2  Pages

  4. MOPA532-250

    2  Pages

  5. MOPA355-200

    2  Pages

  6. FTSS355-300

    2  Pages

  7. FQSS213-50

    2  Pages

  8. FTSS355-50

    2  Pages

  9. FQSS266-50

    2  Pages

  10. FQSS266-200

    2  Pages

  11. FDSS532-1000

    2  Pages

  12. FDSS532-150

    2  Pages

  13. DSS1064-3000

    2  Pages

  14. DSS1064-450

    2  Pages

  15. FQCW266-100

    2  Pages

  16. FQCW266-10

    2  Pages

  17. DSS1064-Q

    2  Pages

  18. FQCW266-25

    2  Pages

  19. FQCW266-200

    2  Pages

  20. DSS1064

    2  Pages

  21. eMOPA532-200

    2  Pages

  22. eMOPA355-100

    2  Pages

  23. eMOPA213-20

    2  Pages

  24. FQCW266-50

    2  Pages

  25. eMOPA266-40

    2  Pages

  26. FQSS213-Q

    2  Pages

  27. FQSS266-Q

    2  Pages

  28. FTSS355-Q

    2  Pages

  29. FQCW266-300

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.