Crystal Laser Systems _________________________________________________ FDSS 532-150 Diode pumped passively Q-switched solid state laser biology · biomedicine · chemistry · analytics Optical Data Spatial Mode Beam Divergence (full angle) Beam Ellipticity Beam Diameter < 2:1 280 ± 80 µm (located at about 110mm inside the laser head) 500 ± 150 µm (at laser exit) Peak Power Pulse Energy Waist Diameter Pulse Repetition Rate (with external trigger) 1 - 100 Hz Pulse Width (FWHM) Polarization Ratio Long term pulse energy stability (6 hours) 1) < ± 3 % Pulse-To-Pulse Stability Optical Output Electrical Data Interface Miscellaneous Options Laser Classification Residual Emission Free Beam Electrical Power Consumption Line Voltage Operating Temperature Laser Head Size SMA-connector for fiber with core diameter  100 µm Synchronization signal output (rise time < 2 ns) Manual shutter or electrical beam blocker Manual or electrical driven wavelength switch 532 nm /1064 nm External telescope (e.g. M=5) Manual or electrical attenuator Stand Alone System (incl. key-switch, heat sink, manual shutter; CDRH compliant) 1) 2) Drift over 6 hours, energy averaged over 10 sec after 5 min of continuous operation, temperature variation < 3 °C/hour. RMS over 1000 pulses after 5 min of continuous operation.

Crystal Laser Systems _________________________________________________ Laser Head and Controller Laser Safety Labels The FDSS532-150 lasers are class 3B / IIIb according to IEC 60825-1:2014 © Oct. 2021, Rev 2.1, CryLaS GmbH. All rights reserved. Product specifications are subject to change without notice.