Crystal Laser Systems _________________________________________________ FDSS 532-1000 Diode pumped passively Q-switched solid state laser biology · biomedicine · chemistry · analytics Optical Data Spatial Mode Beam Divergence (full angle) Beam Ellipticity Beam Diameter < 2:1 500 ± 150 µm (located at about 110mm inside the laser head) 1000 ± 300 µm (at laser exit) Peak Power Pulse Energy Waist Diameter Pulse Repetition Rate (with external trigger) 1 - 80 Hz Pulse Width (FWHM) Polarization Ratio Long term pulse energy stability (6 hours) Pulse-To-Pulse Stability Laser Classification Optical Output Electrical Data Interface Miscellaneous Options Free Beam Electrical Power Consumption Line Voltage Operating Temperature Laser Head Size SMA-connector for fiber with core diameter  400 µm Synchronization signal output (rise time < 2 ns) Manual shutter or electrical beam blocker Manual or electrical driven wavelength switch 532 nm / 1064 nm Manual or electrical attenuator External telescope (e.g. M=5) Heat sink with fan (recommended for repetition rates > 20 Hz) Stand Alone System (incl. key-switch, heat sink, manual shutter; CDRH compliant) 1) 2) Drift over 6 hours, energy averaged over 10 sec after 5 min of continuous operation, temperature variation < 3 °C/hour. RMS over 1000 pulses after 5 min of continuous operation.

Crystal Laser Systems _________________________________________________ Laser Head and Controller Laser Safety Labels The FDSS532-1000 lasers are class 3B / IIIb according to IEC 60825-1:2014 © Jan. 2019, Rev 1.6, CryLaS GmbH. All rights reserved. Product specifications are subject to change without notice.