*mydirectindustry

eMOPA355-100

Product catalog summary

Product Overview: The eMOPA 355-100 is a diode-pumped, passively Q-switched solid-state laser designed for applications in biology, biomedicine, chemistry, and analytics. It operates at a wavelength of 355 nm and is capable of single pulse operation with a pulse width of 0.9 to 1.3 ns.

Optical Specifications: The laser delivers a peak power of over 80 kW at 1000 Hz and a pulse energy greater than 100 µJ. It features a beam divergence of less than 3.5 mrad, beam ellipticity of less than 2:1, and a beam diameter of 450 ± 150 µm at the laser exit. The spatial mode is TEM00, and the polarization ratio is greater than 100:1, vertical. Pulse energy drift over 6 hours is less than ±3%, and pulse-to-pulse energy stability is under 2%.

Electrical Specifications: The laser consumes less than 100 W of electrical power and operates on a line voltage of 90 - 265 V AC (50-60 Hz). It includes interfaces such as USB/RS232, a BNC connector for external triggering (TTL), and an SMB connector for 24 V DC output.

Physical Dimensions: The laser head measures 56 x 140 x 265 mm, while the stand-alone controller unit measures 129.5 x 177 x 180 mm. An OEM controller option is also available with dimensions of 166 x 144 x 105 mm.

Additional Features: Options include multimode fiber coupling, synchronization signal output, electrical or manual wavelength switch (355 nm – 532 nm), an external telescope (beam expander), and an electrical or manual attenuator.

Safety and Compliance: The eMOPA 355-100 is classified as a Class 4 laser according to IEC 60825-1 standards, indicating it poses a significant risk of injury and requires appropriate safety measures.

Catalog excerpts

Crystal Laser Systems _________________________________________________ eMOPA 355-100 Diode pumped passively Q-switched solid state laser 355 nm Single Pulse 0.9 - 1.3 ns single shot (pulse on demand) – 1 kHz • > 100 μJ • External / Internal Trigger biology · biomedicine · chemistry · analytics Optical Data Peak Power Pulse Energy Beam Divergence (full angle) Beam Ellipticity Beam Diameter Spatial Mode Pulse Repetition Rate (with external trigger) single shot (pulse on demand) – 1 kHz Pulse Width (FWHM) Polarization Ratio Pulse Energy Drift over 6h Optical Output Electrical Data Interface Pulse-to-Pulse Energy Stability 2) Laser Classification Free Beam Electrical Power Consumption Line Voltage USB / RS232 BNC connector for external triggering (TTL) SMB connector for 24 V DC output Warm-up Time Operating Temperature Laser Head Size Controller (Stand-Alone Unit Size ) Multimode fiber coupling Synchronization signal output (rise time < 1.5 ns) Electrical or manual wavelength switch (355nm – 532nm) or electrical beam blocker External telescope (beam expander) / Electrical or manual attenuator 1) 2) Averaged over 10s after 10min of continuous operation @ 1kHz activated closed loop control Over 1000 pulses @ 1kHz after 10min of continuous operation

Open the catalog to page 1

Crystal Laser Systems _________________________________________________ Dimensions Laser Head: Controller Stand-Alone: Laser Safety Labels The eMOPA 355-100 lasers are class 4 according to IEC 60825-1 © Feb. 2023, Rev 1.3, CryLaS GmbH. All rights reserved. Product specifications are subject to change without notice Rev. 1.3 Page 2 of 2 CryLaS GmbH · Ostendstraße 25 · D-12459 Berlin · Fon +49(0)30 - 5304 2400 · Fax +49(0)30 - 5304 2444 · [email protected] · www.cryl

Open the catalog to page 2

eMOPA355-100

eMOPA355-100

Catalog excerpts

All CryLaS Crystal Laser Systems GmbH catalogs and technical brochures