*mydirectindustry

DSS1064-3000

Product catalog summary

Product Overview: The DSS 1064-3000 is a diode-pumped passively Q-switched solid-state laser designed for applications in biology, biomedicine, chemistry, and analytics. It operates at a wavelength of 1064 nm, delivering single pulses with a duration of less than 2.5 ns and a repetition rate of 1 to 80 Hz. The laser provides a pulse energy of over 2500 μJ and a peak power exceeding 1250 kW at 20 Hz.

Optical Specifications: The laser operates in the TEM00 spatial mode with a beam divergence of less than 9 mrad and a beam ellipticity of less than 2:1. The waist diameter is 600 ± 150 µm, located approximately 110 mm inside the laser head, and the beam diameter at the exit is 1200 ± 400 µm. The polarization ratio is greater than 50:1, vertical, with long-term pulse energy stability of less than ±6% over six hours and pulse-to-pulse stability of less than 5% rms.

Electrical Specifications: The laser consumes less than 150 W of electrical power and operates on a line voltage of 100-240 V AC (50-60 Hz) or 24 V DC. It includes interfaces for RS 232 and USB connections.

Operational Conditions: The laser requires a warm-up time of less than 15 minutes and operates within a temperature range of 18-38 °C. The laser head dimensions are 217 x 65 x 45 mm.

Options and Accessories: Available options include an SMA-connector for fibers with a core diameter of at least 600 µm, synchronization signal output with a rise time of less than 2 ns, manual or electrical beam blockers, and attenuators. A standalone system option includes a key-switch, heat sink, and manual shutter, compliant with CDRH standards. A heat sink with a fan is recommended for repetition rates above 20 Hz.

Safety and Compliance: The DSS1064-3000 is classified as a class 3B / IIIb laser according to IEC 60825-1:2014 standards.

Note: Product specifications are subject to change without notice.

Catalog excerpts

Crystal Laser Systems _________________________________________________ DSS 1064-3000 Diode pumped passively Q-switched solid state laser biology · biomedicine · chemistry · analytics Optical Data Spatial Mode Beam Divergence (full angle) Beam Ellipticity Beam Diameter < 2:1 600 ± 150 µm (located at about 110mm inside the laser head) 1200 ± 400 µm (at laser exit) Peak Power Pulse Energy Waist Diameter Pulse Repetition Rate (with external trigger) 1 - 80 Hz Pulse Width (FWHM) Polarization Ratio Long term pulse energy stability (6 hours) Pulse-To-Pulse Stability Laser Classification Optical Output Electrical Data Interface Miscellaneous Options Free Beam Electrical Power Consumption Line Voltage Operating Temperature Laser Head Size SMA-connector for fiber with core diameter  600 µm Synchronization signal output (rise time < 2 ns) Manual shutter or electrical beam blocker Manual or electrical attenuator Stand Alone System (incl. key-switch, heat sink, manual shutter; CDRH compliant) Heat sink with fan (recommended for repetition rates > 20 Hz) 1) 2) Drift over 6 hours, energy averaged over 10 sec after 5 min of continuous operation, temperature variation < 3 °C/hour. RMS over 1000 pulses after 5 min of continuous operation.

Open the catalog to page 1

Crystal Laser Systems _________________________________________________ Laser Head and Controller Laser Safety Labels The DSS1064-3000 lasers are class 3B / IIIb according to IEC 60825-1:2014 © Jan. 2019, Rev 1.6, CryLaS GmbH. All rights reserved. Product specifications are subject to change without notice.

Open the catalog to page 2

DSS1064-3000

DSS1064-3000

Catalog excerpts

All CryLaS Crystal Laser Systems GmbH catalogs and technical brochures