Excellent stiffness and strength per density Pre-production series front nose of Energica Eva electric motorbike Polyamide-based carbon fiber reinforced composite SLS (Selective Laser Sintering) Coefficient of thermal expansion Skin contact approved ■ Realization of accurate, reliable, durable prototypes ■ Small production batch and pre-production ■ Aerodynamic motorsport components for F1 and IndyCar such as alternator covers ■ Automotive parts such as cooling ducts, mirrors, headlight lids ■ Aerospace: small satellites and spacecraft components WINDFORM XT 2.0 features excellent mechanical performances, including high stiffness and robustness matched to low density and remarkable lightness KEY FEATURES High tensile modulus Ideal for high-end mechanical applications Resistant to high temperatures (HDT 1,82 Mpa 173,4 °C) High stiffness and tensile strength Ideal for applications where weigth saving is crucial Good elongation at break Spaceproof Compliant to NASA and ESA Outgassing tests Skin contact approved Got a project? GET IN TOUCH WITH OUR EXPERT TO TALK ABOUT MOST SUITABLE MATERIAL AND TECHNOLOGY l e t 's ta l k North America [email protected] Windform® is a brand CRP Technology srl

Test Method SI Unit US Unit General Properties Note: The material properties provided herein are for reference purposes only. Data was generated from the testing of parts produced with Windform® XT 2.0 material under optimal processing conditions. Actual values may vary significantly as they are affected by part geometry and process parameters. Material specifications are subject to change without notice. Standard Technical Details for Accuracy versus Tolerance: For parts up to 1 mm (0.039"), the standard tolerance is ± 0,070 mm (0.003") For parts up to 3 mm (0.118"), the standard tolerance is...