Maximum resistance to shock impact and vibrations, waterproof Automotive functional intake manifold Polyamide-based Carbon fiber reinforced composite ■ Maximum resistance to: impact, vibrations, deformations and high temperatures ■ Dyno and on track testing, pre-series parts SLS [ elective laser Sintering ] S ■ Custom and preserie high-mix low- volume production NASA Outgassing Coefficient of Thermal Expansion Skin contact approved ■ Functional components for the most demanding sectors: Motorsport, Automotive (for under the hood components, intake manifolds) and Aerospace (components for UAV and UAS) WINDFORM SP is suitable to offer maximum resistance to damages, shocks, deformations and vibrations. SP is resistant to the absorption of liquids and moisture. Windform SP distinguishes for its optimal mechanical properties per density units. KEY FEATURES Optimal mechanical properties Resistant to high temperatures (HDT 1,82 Mpa 186,5 °C) High Tensile strength combined with outstanding elongation at break Highest impact & vibration resistance Maximum resistance to damages Waterproof from 1,5 mm thickness. Tested at 1,5 bar Excellent resistance to deformations Skin contact approved Got a project? GET IN TOUCH WITH OUR EXPERT TO TALK ABOUT MOST SUITABLE MATERIAL AND TECHNOLOGY l e t 's ta l k North America [email protected] Windform® is a brand CRP Technology srl

Test Method SI Unit US Unit General Properties Flexural Modulus per density unit 4201,99 Mpa/(g/cc) 609 ksi/(g/cc) Note: The material properties provided herein are for reference purposes only. Data was generated from the testing of parts produced with Windform® SP material under optimal processing conditions. Actual values may vary significantly as they are affected by part geometry and process parameters. Material specifications are subject to change without notice. Standard Technical Details for Accuracy versus Tolerance: For parts up to 1 mm (0.039"), the standard tolerance is ± 0,070 mm...