Polyammide Material Glass Fiber Filled ABOUT f Class Color Technology Test Polyamide-based glass fiber reinforced composite Dark grey HSS (High Speed Sintering) CTI 600 Windform P2 has been engineered for a faster production of functional prototypes and end-use parts requiring high stiffness combined with high tensile strength. Its application extends from automotive to electrical and industrial design. ^ APPLICATIONS ■ Faster production of functional rigid and end-use parts with higher volumes at lower cost ■ Automotive: rigid parts for internal components ■ Electrical: enclosures and housing for electronics ■ Consumer and household goods: packaging and design ■ Industrial products: furniture parts, presentation models, fixtures and tooling High stiffness combined to high tensile strength Detailed surface resolution GET IN TOUCH WITH OUR EXPERT TO TALK ABOUT MOST SUITABLE MATERIAL AND TECHNOLOGY Europe [email protected] North America [email protected] Windform® is a brand CRP Technology srl

Test Method SI Unit US Unit General Properties Note: The material properties provided herein are for reference purposes only. Data was generated from the testing of parts produced with Windform® P2 material under optimal processing conditions. Actual values may vary significantly as they are affected by part geometry and process parameters. Material specifications are subject to change without notice. Standard Technical Details for Accuracy versus Tolerance: For parts up to 1 mm (0.039"), the standard tolerance is ± 0,070 mm (0.003") For parts up to 3 mm (0.118"), the standard tolerance is ±...