Full density, Isotropic insulated material Small functional parts for the Automotive Polyamide with superior mechanical properties ■ Automotive: interiors, ventilation flaps, steering wheel, paddle shifters Dark grey HSS (High Speed Sintering) ■ Electrical: connectors, enclosures, housing for electronics Windform P1 is an innovative material for HSS technology providing for the fast production of small series with good mechanical properties. Adequate to replace injection molded parts. P1 enables the production of complex high quality components at reasonable costs, by-passing the expense of tooling. ■ Consumer and household goods: packaging and design ■ Medical: soles and orthopedic insoles ■ Industrial products: interior fittings, furniture parts, mock-ups KEY FEATURES Isotropic (X,Y,Z axis) Same properties regardless of the direction in which they are measured Detailed surface resolution Full density material adequate to replace injection molded parts High flexibility High recyclability Got a project? GET IN TOUCH WITH OUR EXPERT TO TALK ABOUT MOST SUITABLE MATERIAL AND TECHNOLOGY l e t 's ta l k North America [email protected] Windform® is a brand CRP Technology srl

Test Method SI Unit US Unit General Properties Note: The material properties provided herein are for reference purposes only. Data was generated from the testing of parts produced with Windform® P1 material under optimal processing conditions. Actual values may vary significantly as they are affected by part geometry and process parameters. Material specifications are subject to change without notice. Standard Technical Details for Accuracy versus Tolerance: For parts up to 1 mm (0.039"), the standard tolerance is ± 0,070 mm (0.003") For parts up to 3 mm (0.118"), the standard tolerance is ±...