ABS-LIKE Impact, shocks, bending proof Easystand skibooth. Courtesy of Sport Egger Polyamide-based material ■ Accurate, reliable, and functional prototypes SLS (Selective Laser Sintering) Coefficient of Thermal Expansion ■ Ideal for applications where flexibility and strength cannot be compromised: parts with living hinges or clip fittings, ducting of complex shapes, thin walled connectors with snap-fit systems Windform FX BLACK is characterized by high flexibility and exceptional resistance to repeated bending and torsion. The material shows excellent impact resistance even at low temperatures. Its consistency and behavior are similar to polypropylene and ABS injection moulded parts. ■ Ideal for perfect realization of parts characterized by finest details KEY FEATURES Withstands repeated bending and torsion Consistency and behaviour similar to polypropilene and ABS moulded parts Good shock resistance even at low temperatures No post treatment needed Excellent surface finishing already in its sintered state Got a project? GET IN TOUCH WITH OUR EXPERT TO TALK ABOUT MOST SUITABLE MATERIAL AND TECHNOLOGY l e t 's ta l k North America [email protected] Windform® is a brand CRP Technology srl

Test Method SI Unit US Unit General Properties Note: The material properties provided herein are for reference purposes only. Data was generated from the testing of parts produced with Windform® FX BLACK material under optimal processing conditions. Actual values may vary significantly as they are affected by part geometry and process parameters. Material specifications are subject to change without notice. Standard Technical Details for Accuracy versus Tolerance: For parts up to 1 mm (0.039"), the standard tolerance is ± 0,070 mm (0.003") For parts up to 3 mm (0.118"), the standard tolerance...