*mydirectindustry

Catalogs
CROWN
WI 2300 Initial-Lift Stacker Model

WI 2300 Initial-Lift Stacker Model

Product catalog summary

General Information
Manufacturer: Crown Equipment Corporation
Model: WI 2300-1.6
Power: Electric
Operator Type: Pedestrian
Load Capacity: 1.6 / 2.0 tons
Load Centre: 600 mm
Load Distance (initial lift raised): 858 mm
Wheel Base (initial lift raised): 1562 mm

Weights
Weight less battery: See table 1
Axle Load with load (front/rear): See table 1
Axle Load without load (front/rear): See table 1

Tyres
Tyre Type: Vulkollan
Wheel Size (front): Ø 254 x 85 mm
Wheel Size (rear): Ø 82 x 64 mm
Additional Wheels (castor wheel): Ø 125 x 50 mm
Wheels number (front/rear): 1x + 1/4
Track Width (front): 587 mm
Track Width (rear): 382 mm

Dimensions
Mast collapsed height: See table 1
Free Lift: See table 1
Lift Height: See table 1
Mast extended height: See table 1
Initial Lift: 120 mm
Tiller Arm Height in drive position (min./max.): 780 / 1220 mm
Fork Height lowered: 90 mm
Overall Length: 2021 mm
Headlength: 871 mm
Overall Width: 850 mm
Fork Dimension: 50 x 190 x 1150 mm
Fork Carriage Width: 680 mm
Width Across Forks: 570 mm
Ground Clearance (centre wheelbase): 22 mm
Working Aisle Width (initial lift raised): 2473 mm
Turning Radius (initial lift raised): 1747 mm

Performance
Travel Speed with/without load: 5.3 / 6.0 km/h
Lift Speed with/without load: 0.14 / 0.22 m/s
Lowering Speed with/without load: 0.36 / 0.20 m/s
Max. Gradeability with/without load (5 min. rating): 8 / 17%
Service Brake: Electro-magnetic

Motors
Traction Motor (60 min. rating): 1.5 kW
Lift Motor (15% on time): 3.0 kW
Max. Battery Box Size: 216 x 827 x 627 mm
Battery Voltage (nominal capacity 5h rating): 24 V / 345-375 Ah
Battery Weight: 307 kg
Type Controller: Drive transistor

Standard Equipment
Includes X10® control handle, 24-Volt electrical system, stable four-point suspension, MOSFET transistorised traction control, electric brake, brake override, key switch, horn button in each handgrip, emergency power disconnect switch, SBE 160 red battery connector, auto reverse safety switch, battery discharge indicator with hour meter and lift lockout, Vulkollan drive tyre, tandem load wheels and castor wheels, high visibility mast design, Plexiglas mast guard, DIN battery compartment, maintenance-free self-adjusting steering chain tensioner, tandem load wheels and castor wheels with built-in debris guard, two-speed lower with soft start and stop, two pre-programmed performance levels, and ramp hold.

Optional Equipment
Load backrest, travel alarm, metal mast grill, industrial battery 375 Ah with watering system, hand-held diagnostic set for performance adjustment and truck diagnostic, DIN 160A battery connector.

Electrical System
Features a 24-volt electrical system with a MOSFET controller, microprocessor-controlled with on-board service diagnostics, providing maximum energy efficiency, reduced maintenance, and infinite speed control capability. Faults can be recognized through a status flash code signalled by an LED, stored in the controller memory, and interrogated by service personnel. Robust drive and lift motors ensure high reliability and efficiency. The electric panel has a swing-out feature for easy access and maintenance. Emergency disconnect is easily accessible from all operating positions. Proven componentry ensures high component reliability, and all wiring is colour-coded.

Hydraulic System
Heavy-duty hydraulic motor with integral pump and reservoir for maximum efficiency and durability, selected for optimum lift performance and low operating noise. The hydraulic control module provides quick, smooth initiation and stopping of lift function. Single-speed lift and two-speed lowering is standard. Cylinder rods are hard-chrome plated with polyurethane seals. Relief valve tuned to capacity protects all components in the hydraulic system.

Drive Unit / Brake
Heavy-duty gearbox with helical spur input gear for low noise emission. Fixed, vertically mounted drive motor ensures minimum wear on electrical cables, minimum contamination, and optimum cooling. The drive unit is equipped with an electro-magnetic brake, spring applied, electrically released. The brake is directly mounted on the drive motor shaft, and the braking effort is transmitted through the gear reduction. The brake is activated by the control handle position.

Frame
Easy serviceability of all components in the power unit and simple adjustment to compensate for tyre wear is possible. Single swing-out door design allows easy access to all components. Contoured panels around the power unit and mast give maximum protection to the operator and internal components.

Mast
High visibility two and three-stage mast design features nested I-beams and angled rollers. Lift cylinders are positioned in the outer I-beam profile for best visibility through the mast and clear view onto fork tips during load handling. Standard equipment includes full free lift for two and three-stage mast. Mast cushioning between stages ensures smooth operation. Heavy-duty mast carriage and chain rollers are sealed and lubricated for life. The WI model features fixed formed steel forks welded to a high visibility backrest, accommodating Euro pallets or other containers without bottom boards.

Control Handle
The robust X10® control handle is designed to allow for optimum turning radius with low steering effort. Nearly all control buttons can be operated with either hand and accessed with minimum hand and wrist movement. The operator’s hands are protected within the handle yoke. The horn switches are integrated into the hand grips. An ergonomic forward and reverse thumb wheel allows for precise manoeuvring. The parking brake is activated at the lower and upper end of the tiller position.

Brake Override Function
For easy operation in tight areas, a brake override function is incorporated, allowing the WI 2300 to be driven safely and precisely at creep speed with the handle in a near-vertical position. The control handle remains within the profile of the power unit at all times, even when performing 90° turns. When the forward/reverse thumb wheel is in neutral position, the parking brake is immediately activated, preventing unexpected movement.

Steering
The centre-mounted X10® handle allows for an optimum turning radius and enables the operator to drive and manoeuvre in very congested areas. Steering effort applied at the handle by the operator is transmitted to the drive unit via a double universal shaft and a maintenance-free self-adjusting steering chain.

Battery
Hinged battery top cover allows easy access to the battery and lift out. The battery compartment offers space for batteries up to 375 Amp. hours.

Safety Regulations
Conforms to European safety standards. Dimensions and performance data may vary due to manufacturing tolerances. Performance is based on an average size vehicle and is affected by weight, condition of the truck, how it is equipped, and the conditions of the operating area. Crown products and specifications are subject to change without notice.

Catalog excerpts

C Specifications WI 2300 Series Pedestrian Powered Stacker with Initial Lift WI 2300 Series

Open the catalog to page 1

General Information Manufacturer Model Power Operator Type Load Capacity * Load Centre Load Distance ** Wheel Base ** initial lift raised initial lift raised Weights 2.1 2.2 2.3 Weight Axle Load Axle Load less battery w. load, front / rear w.o. load, front / rear 3.1 3.2 3.3 3.4 3.5 3.6 3.7 Tyre Type Wheel Size Wheel Size Additional Wheels Wheels Track Width Track Width front rear castor wheel number (x=driven) front/rear front rear 4.2 4.3 4.4 4.5 4.6 4.9 4.15 4.19 4.20 4.21 4.22 4.24 4.25 4.32 4.34 4.35 Mast Free Lift Lift Height Mast Initial Lift *** Tiller Arm Height Fork Height Overall Length...

Open the catalog to page 3

WI 2300 Series Standard Equipment 1. X10® control handle. 2. 24-Volt electrical system. 3. Stable four point suspension. 4. MOSFET transistorised traction control. 5. Electric brake. 6. Brake override. 7. Key switch. 8. Horn button in each handgrip. 9. Emergency power disconnect switch. 10. SBE 160 red battery connector. 11. Auto reverse safety switch. 12. Battery discharge indicator with hour meter and lift lockout. 13. Vulkollan drive tyre, tandem load wheels and castor wheels. 14. High visibility mast design. 15. Plexiglas mast guard. 16. DIN battery compartment. 17. Maintenance free self...

Open the catalog to page 4

All CROWN catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list