Catalogs >
CROWN >
High Level Order Pickers w/ 4-point suspension for non-standard loads SP 3571/81

High Level Order Pickers w/ 4-point suspension for non-standard loads SP 3571/81
8Pages

Add to favorites

Catalog excerpts

High Level Order Pickers w/ 4-point suspension for non-standard loads SP 3571/81 - 1

Specifications SP 3571 / 3581 Models High-Level Order Picker C SP 3500 Four-Point Series

Open the catalog to page 1

High Level Order Pickers w/ 4-point suspension for non-standard loads SP 3571/81 - 3

1.1 Manufacturer Crown Equipment Corporation 1.2 Type SP 3571-1.25 TT 1.3 Power electric 1.4 Operator Type order picker 1.5 Load Capacity* Q t 1.25 1.6 Load Centre c mm 600 1.8 Load Distance x mm 545 1.9 Wheel Base y mm 2225 2.1 Weight less battery kg see table 3 2.2 Axle Load w. load, front / rear kg see table 3 2.3 Axle Load w.o. load, front / rear kg see table 3 3.1 Tyres Type polyurethane 3.2 Tyres front mm Ø 330 x 140 3.3 Tyres rear mm Ø 150 x 110 3.4 Additional Wheels castor wheels mm Ø 255 x 75 3.5 Wheels number (x=driven) front/rear 1x + 1/2 3.6 Track Width front b10 mm 762 3.7...

Open the catalog to page 3

High Level Order Pickers w/ 4-point suspension for non-standard loads SP 3571/81 - 5

1.1 Manufacturer Crown Equipment Corporation 1.2 Type SP 3581-0.625 TT 1.3 Power electric 1.4 Operator Type order picker 1.5 Load Capacity* Q t 0.625 1.6 Load Centre c mm 1200 1.8 Load Distance x mm 1300 1.9 Wheel Base y mm 2980 2.1 Weight less battery kg see table 4 2.2 Axle Load w. load, front / rear kg see table 4 2.3 Axle Load w.o. load, front / rear kg see table 4 3.1 Tyres Type polyurethane 3.2 Tyres front mm Ø 330 x 140 3.3 Tyres rear mm Ø 200 x 95 3.4 Additional Wheels castor wheels mm Ø 255 x 75 3.5 Wheels number (x=driven) front/rear 1x + 1/2 3.6 Track Width front b10 mm 762 3.7...

Open the catalog to page 5

High Level Order Pickers w/ 4-point suspension for non-standard loads SP 3571/81 - 7

SP 3571/3581 Models Technical Information Standard Equipment 1. Crown’s Access 1 2 3® Comprehensive System Control 2. Crown manufactured AC traction motor 3. Electronic steering 4. Linear speed control for gradual reduction in speed as platform is raised 5. Two-speed lift and lower with soft start and stop 6. High speed lifting is automatically cut out when forks are 305 mm from max. elevation 7. High speed lowering is automatically cut out when forks are 380 mm from the floor 8. Programmable lift/lower cut outs 9. Intelligent Braking System (IBS) 10. Crown’s Information Display • PIN code...

Open the catalog to page 7

High Level Order Pickers w/ 4-point suspension for non-standard loads SP 3571/81 - 8

Drive System Crown has applied the latest generation AC drive system, enhanced with Access 1 2 3 technology. A Crown manufactured drive unit uses spiral bevel and helical gears from motor to drive wheel axle. Fixed, mounted drive motor does not rotate minimising wear on electrical cables. Crown’s AC Drive system dramatically improves travel speeds, acceleration and deceleration, thus increasing productivity. The standard linear speed control provides smooth travel speed transition as lift heights change and increases productivity. Intelligent Braking System (IBS) Crown’s patented...

Open the catalog to page 8