Catalogs >
CROWN >
Gas Forklift Cushion Tyre (C)

Gas Forklift Cushion Tyre (C)
6Pages

Add to favorites

Catalog excerpts

C-5 SERIES Specifications LPG Counterbalance Truck – Cushion

Open the catalog to page 1

LPG Cushion Counterbalance Truck

Open the catalog to page 2

Manufacturer Model Power Operator Type Load Capacity Load Centre Load Distance General Information Wheel Base Axle Load Axle Load Crown Equipment Corporation C-5 1000-2.0 w. load front / rear w.o. load front / rear Tyre Type Tyre Size front diameter, width, rim diameter Tyre Size rear diameter, width, rim diameter Mast Tilt / Fork Carriage forward / backward collapsed height Mast Free Lift Lift Height Overhead Guard Height Seat Height extended height 4.19 Overall Length 4.20 Headlength 4.21 Overall Width 4.22 front, wide Ground Clearance Working Aisle Width 4.34 4.35 Turning Radius with...

Open the catalog to page 3

Table 1 – Mast C-5 1000-2.0 / C-5 1000-2.5 TL forward / backward collapsed height without load backrest with 760 mm load backrest 4.3 Free Lift 4.4 Lift Height 4.5 Mast Interlock extended height, with 760 mm lbr. fork height forward / backward collapsed height without load backrest with 760 mm load backrest extended height, with 760 mm lbr. 4.3 Free Lift 4.4 Lift Height 4.5 Mast Interlock fork height forward / backward collapsed height without load backrest with 915 mm load backrest extended height, with 915 mm lbr. 4.3 Free Lift 4.4 Lift Height 4.5 Mast Interlock fork height

Open the catalog to page 4

C Standard Equipment 1. Industrial 2.4 liter Crown LPG engine compliant to current EU standards 2. Hydrodynamic transaxle 3. Dual open-core radiator 4. Crown’s Access 1 2 3® Comprehensive System Control 5. Intrinsic Stability System™ Greater mass and low centre of gravity • Tilt interlock • Tilt speed control • Stalled engine braking and steering • Hill hold 6. Top speed limiter 7. Fold down LP bottle bracket 8. Two pedal control with combination inching/brake 9. Operator compartment design features • Low cowl for fork and floor visibility • Wide placed overhead guard uprights reduce visual...

Open the catalog to page 5

Cooling A standard Dual Open-Core Radiator offers separate cooling for the engine and transmission and is isolated from the truck, separating it from impact and improving radiator life. The open core feature offers large spacing between cooling fins for reduced clogging. Air flow is maximised by a ten-blade fan that increases radiator performance and efficiency. The full fan shroud surrounds the radiator core surface. Its two-piece design aids in serviceability and is sealed to prevent air flow from bypassing the radiator core. Air flow is further maximised by the custom venturi design that...

Open the catalog to page 6