SC 6000 SERIES Specifications Three and Four Wheel Counterbalance Truck

Three Wheel Counterbalance Truck

General Information Power Operator Type Load Capacity Load Centre Load Distance Wheel Base Axle Load Axle Load less battery w. load front/rear w.o. load front/rear Tyre Type Tyres Wheels Track Width Mast Tilt Mast Free Lift Lift Height Mast Overhead Guard Height Seat Height Tow Hitch Height Lowered Fork Height Headlength * Overall Width 4.22 Fork Dimension 4.23 Fork Carriage 4.24 Fork Carriage Width 4.31 Ground Clearance 4.32 Travel Speed Lift Speed Lower Speed Drawbar Pull Gradeability Max. Gradeability Acceleration Time forward/backward collapsed height w. / w.o. lbr h1 h2 h3 extended height...

Four Wheel Counterbalance Truck 4.20 shown with cabin option

General Information Power Operator Type Load Capacity Load Centre Load Distance Wheel Base Axle Load Axle Load less battery w. load front / rear w.o. load front / rear Tyre Type Tyres Wheels Track Width front rear no. (x=driven) front/rear load side power unit side Fork Carriage Fork Carriage Width Working Aisle Width Turning Radius Travel Speed Lift Speed Lower Speed Drawbar Pull Gradeability Max. Gradeability Acceleration Time Traction Motor Lift Motor Battery Voltage Fork Dimension Mast Tilt Mast Free Lift Lift Height Mast Overhead Guard Height Seat Height Tow Hitch Height Lowered Fork Height...

Table 1 – Mast Chart TL Mast SC 6010 SC 6020 SC 6040 SC 6060 4.1 Tilt Extended Height Extended Height with load backrest forward / backward without load backrest h2 with load backrest 4.2 Collapsed Height 4.3 Free Lift 4.4 Lift Height Extended Height Extended Height with load backrest 4.5 ** 5/3 with front panel (Windshield) ** Not available on SCT 606X-2.0, SCF 606X-2.0 forward / backward without load backrest h2 with load backrest 4.3 Free Lift 4.4 Lift Height Extended Height Extended Height with load backrest

Table 2 – Working Aisle Width 1.8 Load Distance* Turning Radius 4.33 Pallets Aisle Width according to VDI 2198 length x width integrated sideshift with hook-on sideshift * Load Distance: Add 36 mm for Crown integrated sideshift, add 59 mm for hook on sideshift

C Standard Equipment 1. Crown’s Access 1 2 3® Comprehensive System Control 2. InfoPoint™ System 3. Crown-manufactured AC drive and AC lift motors 4. e-GEN® Braking System with automatic parking brake 5. Adjustable armrest, forward/backwards with • Fingertip control levers 6. Thumb operated travel direction switch integrated in armrest 7. Intrinsic Stability System • Travel speed reduction and appropriate electronic brake control when forks are above free lift • Forward tilt interlock reduces forward tilt above freelift to maximise stability • Controlled tilt speeds • Counterweight exceeds required...

Crown Drive System Crown has applied the latest generation AC drive system, enhanced with Access 1 2 3 technology. The demand for high efficiency systems that closely match customer torque requirements is met with this latest generation control system. Crown-manufactured, independently controlled, AC drive motors are specifically designed to optimise system integration between the traction and braking controls. Crown’s Access 1 2 3 technology provides optimum performance and control by offering a communication interface for operators and technicians, intelligent coordination of lift truck system...

SC 6000 SPEC GB 03/16, 10 M03432-006-02 Printed in Germany European Manufacturing: Crown Gabelstapler GmbH & Co. KG Roding, Germany www.crown.com