Millenium Evo expansion XAP10 Analog expansion 10 I/O

Product catalog summary

Overview: The XAP10 is an analog expansion module for the Millenium Evo system, offering 10 I/O with 6 digital inputs (4 analog) and 4 digital outputs (2 PWM). It supports 12-bit resolution for 0-10V and 11-bit for 4-20mA signals, and can be used in pairs to achieve a 44 I/O configuration. The module is powered by the controller.

Specifications:

Certifications: CE, cULus Listed, compliant with low voltage and EMC directives.
Environmental: Operates at altitudes up to 2000m, with a temperature range of -20°C to +60°C. Storage temperature ranges from -40°C to +80°C.
Mechanical: Vibration and shock resistant, with IP40 protection on the front panel and IP20 on the terminal block.
Material: Made from Lexan, UL94V0, halogen-free.

Inputs:

Digital Inputs: 24 VDC, with a current range of 1.5 to 2.1 mA depending on voltage.
Analog Inputs: 0-10V with 12-bit resolution and 0-20mA with 11-bit resolution. Both types have specific impedance and error margins.

Outputs:

Digital Outputs: 10-28.8 VDC, with built-in protections against overloads, short-circuits, and overvoltages.
PWM Outputs: Programmable with frequencies ranging from 14.11 Hz to 1758.24 Hz, with a cyclic ratio of 0-100%.
Analog Outputs: 0-10 VDC, with a load type of resistive and a resolution of 10 bits.

Warnings: The document specifies that the information provided is for informational purposes only and does not constitute a warranty or contractual commitment. Users are advised to consult Crouzet Automatismes SAS for specific applications and to conduct appropriate tests to ensure suitability.

Catalog excerpts

Millenium Evo expansion XAP10 Analog expansion 10 I/O-1

General characteristics

Open the catalog to page 1

Millenium Evo expansion XAP10 Analog expansion 10 I/O-2

Weight Without packing: 105 g With packing: 145 g Dimensions Without packing: 60.4 x 90 x 60.3 mm / 2.37 x 3.54 x 2.37 inch With packing: 93 x 103 x 65 mm / 3.66 x 4.06 x 2.56 inch Nominal voltage Powered by the controller Inputs Digital 24 VDC and analog inputs 12 bits / 10 V & 11 bits / 0-20 mA - 6 inputs from I1 to I6 (from I1 to I4 Analog) Input used as digital input (power off state) Input voltage Input current Input impedance Logic 1 voltage threshold Making current at logic state 1 Logic 0 voltage threshold Release current at logic state 0 Response time Sensor type Conforming...

Open the catalog to page 2

Millenium Evo expansion XAP10 Analog expansion 10 I/O-3

Maximum error at 55°C (131°F) Repeat accuracy at 55°C (131°F) Isolation between analogue channel and power supply Protection against polarity inversions Overvoltage protection Cable length None Yes Yes. If the input voltage is > 7 V, this one is automatically switched on 0-10V configuration. < 30 m with shielded twisted cable (sensor not isolated) Outputs Digital / PWM solid state output - 2 solid state outputs from O1 to O2 Output used as digital output Breaking voltage Nominal voltage Nominal current Max. breaking current Non repetitive overload current Maximum breaking current in the common Voltage...

Open the catalog to page 3

Millenium Evo expansion XAP10 Analog expansion 10 I/O-4

Built-in protections Against overloads and short-circuits: Yes Against over voltages (*): Yes Against inversions of power supply: Yes (*) In the absence of a volt-free contact between the output of the logic controller and the load Galvanic isolation No Cable length < 10 m with shielded twisted cable ConnectionsINPUTS OUTPUTS Warning: The product information contained in this catalogue is given purely as information and does not constitute a representation, warrantly or any form of contractual commitment. Crouzet Automatismes SAS and its subsidiaries reserve the right to modify their...

Open the catalog to page 4