COMPACT PREWIRED LIMIT SWITCH 8387 with cable output › › › › Metal case - «EN» size Positive opening operation IP66/IP67/IP69 UL approved Main specifications Characteristics Standard Standard Standard Standard Plunger with 90° roller Plunger with 90° roller Plunger with 90° roller Plunger with 90° roller Mechanical characteristics Sequence Snap-action Metal plunger Type of output Cable length 1 m Cable length 2 m Cable length 3 m Cable length 6 m Cable length 1 m Cable length 2 m Cable length 3 m Cable length 6 m Steel roller plunger Metal plunger with threaded barrel Steel roller plunger with threaded barrel Steel roller lever (2 directions of attack) BK-BK BN-BU BK-BK BN-BU BK-BK BN-BU BK-BK BN-BU BK-BK BN-BU BK-BK BN-BU BK-BK BN-BU BK-BK BN-BU Max. operating force (N) Max. operating torque (Nm) Max. total travel force (N) Max. total travel torque (Nm) Min. positive opening force (N) Min. positive opening torque (Nm) Mechanical life (operations) Vertical approach speed Horizontal approach speed (30° cam) Weight - 1m cable (g) General characteristics IEC/EN 60947.5.1 including Annex K Dimensional conformity : NFC 63145 (8387 series) Low voltage directive : 2014/35 EU Conformity to standards Protection against electric shock Degree of protection IEC 60529 - IEC 62262 Degree of protection according to NEMA 250 Connections Operating temperature (°C) Assigned impulse voltage (Uimp) - V Assigned insulation voltage (Ui) V Thermal current (Ith) A Low-load switching - Minimum voltage (V) Low-load switching - Minimum current (mA) Assigned working characteristics (EN 60 947.5.1, UL 508) Electrical life according to IEC 60947-5-1 appendix C Electrical protection Approvals IEC/EN 61140 class 1, degree of pollution 3 IP66/IP67/IP69 - IK07 Type 1, 3, 4, 6, 13 H05-VVF cable 5x0.75 mm2 (AWG19), ext. Ø 7.3 mm -25 ➞ +70 °C (-40 ➞ +70 °C : please consult us) 2500 500 10 10 40 A300 = AC15 240 V 3 A / 120 V 6 A Alternating current Q150 = DC13 125 V 0.55 A Direct current 250 V 3 A AC15 500.000 operations 24 V 8 W DC13 500.000 operations Integral protective earth conductor Short-circuit protection device : IEC/EN 60947-5-1 Fuse 6 AgG UL 508, UL 50 Product adaptations › Low current version with gold plated contacts (see «8387 low level») › Rear output (see dimensions) › Protected plunger for harsh environment › Special cable, length of cable/connector/stripping › -40 °C operating temperature Standard product Product made to order Principles Function Four-terminal double break two-way contact element (form Zb) with positive opening NC contacts. The 2 moving contacts are electrically isolated from one another. Snap-action contact 1

B POP setting index C See sequence diagram D Rear output on request E Ø 8 x 4.3 - 4 counterbores B POP setting index C Max. thickness 8.5 mm B POP setting index C Max.tightening thickness 10.5 B POP setting index C Max.tightening thickness 10.5 Lever angular settings B Offset A (standard mounting) C Offset B (by turning the lever) For offset 13.6 or 36.6 mm: please consult us By 90° steps (standard mounting) By 6° steps (by turning the block) Warning: The product information contained in this catalogue is given purely as information and does not constitute a representation, warranty or any form...

COMPACT PREWIRED LIMIT SWITCH 8387 with connector output › › › › › 4-pin or 5-pin M12 connectors Metal case - «EN» size Positive opening operation (4-pin models) IP66/IP67/IP69 UL approved Main specifications Characteristics 4-pin 4-pin / 90° roller 5-pin 5-pin / 90° roller Mechanical characteristics Sequence Snap action Metal plunger Type of output Connector Connector Connector Connector Steel roller plunger Metal plunger with threaded barrel General characteristics IEC/EN 60947.5.1 including Annex K Dimensional conformity : NFC 63145 (8387 series) Low voltage directive : 2014/35 EU Conformity...

B See sequence diagram C POP setting index D Rear output on request E Ø 8 x 4.3 - 4 counterbores B POP setting index C Max.tightening thickness 8.5 B POP setting index C Max.tightening thickness 10.5 B POP setting index C Max.tightening thickness 10.5 Lever angular settings B Offset A (standard mounting) C Offset B (by turning the lever) For offset 13.6 or 36.6 mm: please consult us By 90° steps (standard mounting) By 6° steps (by turning the blok) Warning: The product information contained in this catalogue is given purely as information and does not constitute a representation, warranty or...

COMPACT PREWIRED LIMIT SWITCH 8387 low level with cable or connector output › › › › › Metal case - «EN» size Positive opening operation 5-pin M12 connector or cable output IP66/IP67/IP69 UL approved Main specifications Characteristics Standard Standard Plunger with 90° roller Plunger with 90° roller Mechanical characteristics Sequence Snap action Metal plunger Type of output Cable 1 m long Connector 5-pin Cable 1 m long Connector 5-pin Max. operating force N (N.m) Max. total travel force N (N.m) Mechanical life (operations) Vertical approach speed Horizontal approach speed (30° cam) Weight -...

B See sequence diagram C Rear output on request D Ø 8 x 4.3 - 4 counterbores B See sequence diagram C Rear output on request D Ø 8 x 4.3 - 4 counterbores 83 874 3 Lever angular settings By 90° steps (standard mounting) 1 By 6° steps (by turning the block) B Max.tightening thickness 8.5 B Offset A (standard mounting) C Offset B (by turning the lever) For offset 13.6 or 36.6 mm: please consult us D POP setting index Warning: The product information contained in this catalogue is given purely as information and does not constitute a representation, warranty or any form of contractual commitment....